HOW TO FOLD AND MOVE THE TREADMILL
HOW TO FOLD THE TREADMILL FOR STORAGE
Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be- come damaged. Remove the key and unplug the power
cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill.
1.Hold the treadmill with your hands in the locations shown
at the right. CAUTION: To decrease the possibility of in- jury, bend your legs and keep your back straight. As
you raise the treadmill, make sure to lift with your legs
rather | than your back. | Raise the treadmill about halfway |
to the | vertical position. |
|
2.Move your right hand to the position shown and hold the
treadmill firmly. Using your left hand, pull the lock knob to the left and hold it. Raise the treadmill until the lock pin is aligned with the hole in the housing. Insert the lock pin
into the housing. Make sure that the lock pin is fully in-
serted into the housing. | Note: If the adjustment knob |
hits the upright, press on the knob. |
|
To protect the floor or carpet from damage, place a mat under the treadmill. Keep the treadmill out of direct sunlight. Do not leave the treadmill in the stor- age position in temperatures above 85° Fahrenheit.
HOW TO MOVE THE TREADMILL
Before moving the treadmill, convert the treadmill to the stor-
age position as described above.Make sure that the lock pin is fully inserted into the catch.
1.Hold the handrails as shown and place one foot against a wheel.
2.Tilt the treadmill back until it rolls freely on the front wheels.
Carefully move the treadmill to the desired location. | Never |
move the treadmill without tipping it back. To reduce |
|
the risk of injury, use extreme caution while moving |
|
the treadmill. Do not attempt to move the treadmill |
|
over an uneven surface. |
|
3.Place one foot on wheel, and carefully lower the treadmill until it is resting in the storage position.
Knob |
Housing |
Base
Front Wheels
24
