Mode 3: Stick Vacuum
1
4
2
3
English
Your Stick vacuum can be carried by the pet hair power brush holder.
5
CAUTION: The Power Button for all three modes is on the Hand Vac handle. Always turn the power OFF before plugging and unplugging, when adding or removing attachments, or when connecting Hand Vac to or from the Backsaver™ Wand.
STICK VAC
In Stick Vacuum Mode, you have constant suction power with the added swivel steering capabilities of the Shark® Swivel Floor Nozzle:
1Remove Air Dam from Hand Vac and place the Air Dam in the slot on the Hand Vac exhaust filter cover.
2Slide Hose Mounting Plate into grooves on the underside of the Dust
Cup so that Hose Mount assembly covers the inlet on Hand Vac.
3With the Dust Cup end facing upward, guide the attached Hose
Mounting plate onto the two pins on either side of the Backsaver™ Wand.
4Snap the shorter end of the Flexible Hose into lower connection on the Hand Vac (both Hose ends are the same).
Snap other end of the Flexible Hose to upper connection on Backsaver™ Wand.
The single wheel of the Hand Vac fits into the holder just below the pins.
5Tighten the Hand Vac Locking Dial to secure onto Backsaver™ Wand.
10 | TOLL FREE: |
www.sharkclean.com | 11 |
