Zebra Technologies 14245L-003 manual P

135
EPL Commands
P
12/16/13 EPL Programming Guide 14245L-003 Rev. A
P
Print
Description Use this command to print the contents of the image buffer.
Syntax Pp1,[p2]
Parameters This table identifies the parameters for this format:
Note • The P command cannot be used inside of a stored form sequence. For automatic
printing of stored forms, use the PA command.
Parameters Details
p1 = Number of label sets. Accepted Values: 1 to 65535
p2 = Number of copies of
each labael
Accepted Values: 1 to 65535
Number of copies of each label (used in combination with
counters to print multiple copies of the same label).
Example •
P1↵: prints one label set
P2,1↵: prints 2 label sets of one
label each
P5,2↵: prints 5 label sets of 2
labels each