SGD Wireless Commands
wlan.roam.interval
296
14245L-003 Rev. A EPL Programming Guide 12/16/13
wlan.roam.interval
Description This printer setting refers to specifying the wireless roam interval. For printer
support, see SGD Command Support onpage 31 5.
Type getvar; setvar
This table identifies the commands for this format:
Note • For details on SGD command structure, see Command Structure onpage 250.
Commands Details
getvar This command instructs the printer to respond with the specified roam
interval.
Format: ! U1 getvar "wlan.roam.interval"
setvar This command instructs the printer to set the wireless roam interval.
Format: ! U1 setvar "wlan.roam.interval" "value"
Valu e s : Decimal values between 5 and 255 inclusive
Default: "20"
Example • This setvar example shows the value set to "20".

! U1 setvar "wlan.roam.interval" "20"

When the setvar value is set to "20", the getvar result is "20".