Zebra Technologies 14245L-003 manual Wlan.ip.timeout.value, 284, U1 setvar wlan.ip.timeout.value

284

SGD Wireless Commands

wlan.ip.timeout.value

wlan.ip.timeout.value

Description This network setting refers to the number of seconds before the connection times out for the wireless print server. For this to take effect, the print server must be reset. For printer support, see SGD Command Support on page 315.

Type getvar; setvar

Note • For details on SGD command structure, see Command Structure on page 250.

This table identifies the commands for this format:

Commands	Details
getvar	This command instructs the printer to respond with the time, in seconds,
	before the connection times out.
	Format: ! U1 getvar "wlan.ip.timeout.value"
setvar	This command instructs the printer to set the the time value of the wireless
	print server, in seconds, before the connection times out.
	Format: ! U1 setvar "wlan.ip.timeout.value" "value"
	Values: "1" through "3600"
	Default: "300"

Example • This setvar example shows the value set to "300".

!U1 setvar "wlan.ip.timeout.value" "300"

When the setvar value is set to "300", the getvar result is "300".

14245L-003 Rev. A EPL Programming Guide 12/16/13