Accton Technology ES4524D, ES4548D manual Dot1x timeout quiet-period, Dot1x timeout re-authperiod

dot1x timeout quiet-period 43

•The connected client is re-authenticated after the interval specified by the dot1x timeout re-authperiodcommand. The default is 3600 seconds.

Example

Console(config)#interface eth 1/2

Console(config-if)#dot1x re-authentication

Console(config-if)#

Related Commands

dot1x timeout re-authperiod(43-5)

dot1x timeout quiet-period

This command sets the time that a switch port waits after the Max Request Count has been exceeded before attempting to acquire a new client. Use the no form to reset the default.

Syntax

dot1x timeout quiet-period seconds no dot1x timeout quiet-period

seconds - The number of seconds. (Range: 1-65535)

Default

60 seconds

Command Mode

Interface Configuration

Example

Console(config)#interface eth 1/2

Console(config-if)#dot1x timeout quiet-period 350

Console(config-if)#

dot1x timeout re-authperiod

This command sets the time period after which a connected client must be re-authenticated.

Syntax

dot1x timeout re-authperiod seconds no dot1x timeout re-authperiod

seconds - The number of seconds. (Range: 1-65535)

Default

3600 seconds

43-5