Accton Technology 24/48-Port, ES4548D, ES4524D Introduction, Key Features, Feature Description

Chapter 1: Introduction

This switch provides a broad range of features for Layer 2 switching. It includes a management agent that allows you to configure the features listed in this manual. The default configuration can be used for most of the features provided by this switch. However, there are many options that you should configure to maximize the switch’s performance for your particular network environment.

Key Features

	Table 1-1 Key Features
Feature	Description
Configuration Backup	Backup to TFTP server
and Restore
Authentication	Console, Telnet, web – User name / password, RADIUS, TACACS+
	Web – HTTPS
	Telnet – SSH
	SNMP v1/2c - Community strings
	SNMP version 3 – MD5 or SHA password
	Port – IEEE 802.1X, MAC address filtering
Access Control Lists	Supports up to 32 ACLs, 96 MAC rules, 96 IP rules, and 96 IPv6 rules
DHCP Client	Supported
DNS	Proxy service
Port Configuration	Speed and duplex mode and flow control
Rate Limiting	Input and output rate limiting per port
Port Mirroring	One or more ports mirrored to single analysis port
Port Trunking	Supports up to 24 trunks using either static or dynamic trunking (LACP)
Broadcast Storm	Supported
Control
Address Table	Up to 8K MAC addresses in the forwarding table, 1024 static MAC addresses
IP Version 4 and 6	Supports IPv4 and IPv6 addressing, management, and QoS
IEEE 802.1D Bridge	Supports dynamic data switching and addresses learning
Store-and-Forward	Supported to ensure wire-speed switching while eliminating bad frames
Switching
Spanning Tree	Supports standard STP, Rapid Spanning Tree Protocol (RSTP), and Multiple
Algorithm	Spanning Trees (MSTP)
Virtual LANs	Up to 256 using IEEE 802.1Q, port-based, protocol-based, private VLANs, and
	802.1Q tunneling (QinQ)

1-1