Accton Technology 24/48-Port, ES4548D manual Class-map, Syntax No class-map class-map-namematch-any

56 Quality of Service Commands

Notes: 1. You can configure up to 16 rules per Class Map. You can also include multiple classes in a Policy Map.

2.You should create a Class Map (page 56-2)before creating a Policy Map (page 56-4). Otherwise, you will not be able to specify a Class Map with the class command (page 56-4)after entering Policy-Map Configuration mode.

class-map

This command creates a class map used for matching packets to the specified class, and enters Class Map configuration mode. Use the no form to delete a class map and return to Global configuration mode.

Syntax

[no] class-map class-map-name[match-any]

•match-any- Match any condition within a class map.

•class-map-name- Name of the class map. (Range: 1-16 characters)

Default Setting

None

Command Mode

Global Configuration

Command Usage

•First enter this command to designate a class map and enter the Class Map configuration mode. Then use the match command (page 56-3)to specify the criteria for ingress traffic that will be classified under this class map.

•Up to 16 match commands are permitted per class map.

•The class map is used with a policy map (page 56-4)to create a service policy (page 56-7)for a specific interface that defines packet classification, service tagging, and bandwidth policing.

Example

This example creates a class map call “rd_class,” and sets it to match packets marked for DSCP service value 3:

Console(config)#class-map rd_class match-any

Console(config-cmap)#match ip dscp 3

Console(config-cmap)#

Related Commands

show class map (56-8)

56-2