clear counters 45

Command Usage

This command allows you to disable a port due to abnormal behavior (e.g., excessive collisions), and then reenable it after the problem has been resolved. You may also want to disable a port for security reasons.

Example

The following example disables port 5.

Console(config)#interface ethernet 1/5

Console(config-if)#shutdown

Console(config-if)#

clear counters

This command clears statistics on an interface.

Syntax

clear counters interface

interface

ethernet unit/port

-unit - Stack unit. (Range: Always 1)

-port - Port number. (Range: 1-24/48)

port-channel channel-id(Range: 1-24)

Default Setting

None

Command Mode

Privileged Exec

Command Usage

Statistics are only initialized for a power reset. This command sets the base value for displayed statistics to zero for the current management session. However, if you log out and back into the management interface, the statistics displayed will show the absolute value accumulated since the last power reset.

Example

The following example clears statistics on port 5.

Console#clear counters ethernet 1/5

Console#

45-7

Page 413
Image 413
Accton Technology 24/48-Port, ES4548D Syntax Clear counters interface, Port-channel channel-idRange Default Setting