Accton Technology ES4548D Field Attributes CLI, Basic information, Configuration, Current status

16 Port Configuration

Field Attributes (CLI)

Basic information:

•Port type – Indicates the port type. (1000BASE-T or SFP)

•MAC address – The physical layer address for this port. (To access this item on the web, see “Setting the Switch’s IP Address (IP Version 4)” on page 5-1.)

Configuration:

•Name – Interface label.

•Port admin – Shows if the interface is enabled or disabled (i.e., up or down).

•Speed-duplex– Shows the current speed and duplex mode. (Auto, or fixed choice)

•Capabilities – Specifies the capabilities to be advertised for a port during auto-negotiation. (To access this item on the web, see “Configuring Interface Connections” on page 3-48.) The following capabilities are supported.

•10half - Supports 10 Mbps half-duplex operation

•10full - Supports 10 Mbps full-duplex operation

•100half - Supports 100 Mbps half-duplex operation

•100full - Supports 100 Mbps full-duplex operation

•1000full - Supports 1000 Mbps full-duplex operation

•Sym - Transmits and receives pause frames for flow control

•FC - Supports flow control

•Broadcast storm – Shows if broadcast storm control is enabled or disabled.

•Broadcast storm limit – Shows the broadcast storm threshold.

(500 - 262143 packets per second)

•Flow control – Shows if flow control is enabled or disabled.

•LACP – Shows if LACP is enabled or disabled.

•Port security – Shows if port security is enabled or disabled.

•Max MAC count – Shows the maximum number of MAC address that can be learned by a port. (0 - 1024 addresses)

•Port security action – Shows the response to take when a security violation is detected. (shutdown, trap, trap-and-shutdown)

•Media type – Shows the forced/preferred port type to use for combination ports 21-24 (ES4524D) or 45-48 (ES4548D). (copper forced, SFP forced, SFP preferred auto)

Current status:

•Link status – Indicates if the link is up or down.

•Port operation status – Provides detailed information on port state. (Displayed only when the link is up.).

•Operation speed-duplex– Shows the current speed and duplex mode.

•Flow control type – Indicates the type of flow control currently in use. (IEEE 802.3x, Back-Pressure or none)

16-2