Accton Technology 24/48-Port, ES4548D, ES4524D manual 55-10, 55-13

26 Class of Service Configuration

Web – Click Priority, IP DSCP Priority. Select an entry from the DSCP table, enter a value in the Class of Service Value field, then click Apply.

Figure 26-7 IP DSCP Priority

CLI – The following example globally enables DSCP Priority service on the switch, maps DSCP value 0 to CoS value 1 (on port 1), and then displays the DSCP Priority settings.

Console(config)#map			ip dscp	55-10
Console(config)#interface ethernet 1/1				45-1
Console(config-if)#map ip dscp 1 cos 0				55-10
Console(config-if)#end
Console#show map ip			dscp ethernet 1/1	55-13
DSCP mapping status: disabled
Port	DSCP COS
--------- ---- ---
Eth 1/ 1	0	0
Eth 1/ 1	1	0
Eth 1/ 1	2	0
. Eth 1/ 1	3	0
.
.
Eth 1/ 1	61	0
Eth 1/ 1	62	0
Eth 1/ 1	63	0
Console#

*Mapping specific values for IP DSCP is implemented as an interface configuration command, but any changes will apply to the all interfaces on the switch.

26-10