Accton Technology ES4548D, ES4524D, 24/48-Port manual Configuration Commands

Entering Commands 31

Username: guest

Password: [guest login password]

CLI session with the 24/48 L2/L4 GE Switch is opened.

To end the CLI session, enter [Exit].

Console>enable

Password: [privileged level password]

Console#

Configuration Commands

Configuration commands are privileged level commands used to modify switch settings. These commands modify the running configuration only and are not saved when the switch is rebooted. To store the running configuration in non-volatile storage, use the copy running-configstartup-configcommand.

The configuration commands are organized into different modes:

•Global Configuration - These commands modify the system level configuration, and include commands such as hostname and snmp-server community.

•Access Control List Configuration - These commands are used for packet filtering.

•Class Map Configuration - Creates a DiffServ class map for a specified traffic type.

•Interface Configuration - These commands modify the port configuration such as speed-duplexand negotiation.

•Line Configuration - These commands modify the console port and Telnet configuration, and include command such as parity and databits.

•Multiple Spanning Tree Configuration - These commands configure settings for the selected multiple spanning tree instance.

•Policy Map Configuration - Creates a DiffServ policy map for multiple interfaces.

•VLAN Configuration - Includes the command to create VLAN groups.

To enter the Global Configuration mode, enter the command configure in Privileged Exec mode. The system prompt will change to “Console(config)#” which gives you access privilege to all Global Configuration commands.

Console#configure

Console(config)#

31-7