Accton Technology ES4548D, ES4524D, 24/48-Port manual Telnet Server Commands, Ip telnet server

41 User Authentication Commands

Related Commands

ip http secure-server(41-12)

Telnet Server Commands

This section describes commands used to configure Telnet management access to the switch.

Table 41-9 Telnet Server Commands

Command	Function	Mode	Page
ip telnet server	Allows the switch to be monitored or configured from Telnet; also	GC	41-11
	specifies the port to be used by the Telnet interface

ip telnet server

This command allows this device to be monitored or configured from Telnet. It also specifies the TCP port number used by the Telnet interface. Use the no form without the “port” keyword to disable this function. Use the no from with the “port” keyword to use the default port.

Syntax

ip telnet server [port port-number]no telnet server [port]

•port - The TCP port number used by the Telnet interface.

•port-number- The TCP port to be used by the browser interface. (Range: 1-65535)

Default Setting

•Server: Enabled

•Server Port: 23

Command Mode

Global Configuration

Example

Console(config)#ip telnet server

Console(config)#ip telnet port 123

Console(config)#

41-14