Accton Technology ES4548D manual Show system, Show users, This command displays system information

show system 34

show system

This command displays system information.

Default Setting

None

Command Mode

Normal Exec, Privileged Exec

Command Usage

•For a description of the items shown by this command, refer to “Displaying System Information” on page 4-1.

•The POST results should all display “PASS.” If any POST test indicates “FAIL,” contact your distributor for assistance.

Example
Console#show system
System Description: 24/48		L2/L4 IPV4/IPV6 GE Switch
System OID String: 1.3.6.1.4.1.259.6.10.84
System information
System Up time: 0 days, 1 hours, 23 minutes, and 44.61 seconds
System Name	: [NONE]
System Location	: [NONE]
System Contact	: [NONE]
MAC Address (Unit1):		00-20-1A-DF-9C-A0
Web Server:		Enabled
Web Server Port:		80
Web Secure Server:		Enabled
Web Secure Server Port:		443
Telnet Server:		Enable
Telnet Server Port:		23
Jumbo Frame:		Disabled
POST Result:
DUMMY Test 1		PASS
DRAM Test		PASS
Timer Test		PASS
PCI Device 1 Test		PASS
I2C Bus Initialization		PASS
Switch Int Loopback Test		..... PASS
Fan Speed Test		PASS
Done All Pass.
Console#

show users

Shows all active console and Telnet sessions, including user name, idle time, and IP address of Telnet client.

Default Setting

None

34-7