Accton Technology ES4548D, ES4524D manual Binding a Port to an Access Control List, 44-6, 44-15

Binding a Port to an Access Control List 15

Binding a Port to an Access Control List

After configuring the Access Control Lists (ACL), you should bind them to the ports that need to filter traffic. You can only bind a port to one ACL for each basic type – IPv4 ingress, MAC ingress, and IPv6 ingress.

Command Usage

• This switch supports ACLs for ingress filtering only.

Command Attributes

•Port – Fixed port, SFP module, or XFP module. (Range: 1-24/48)

•IP – Specifies the IPv4 ACL to bind to a port.

•MAC – Specifies the MAC ACL to bind to a port.

•IPv6 – Specifies the IPv6 ACL to bind to a port.

•IN – ACL for ingress packets.

•ACL Name – Name of the ACL.

Web – Click Security, ACL, Port Binding. Mark the Enable field for the port you want to bind to an ACL for ingress traffic, select the required ACL from the drop-down list, then click Apply.

Figure 15-7 ACL Port Binding

CLI – This examples assigns an IP and MAC ingress ACL to port 1, and an IP ingress ACL to port 2.

Console(config)#interface ethernet	1/1		45-1
Console(config-if)#ip access-group	tom	in	44-6
Console(config-if)#mac access-group jerry in			44-15

Console(config-if)#exit

Console(config)#interface ethernet 1/2

Console(config-if)#ip access-group tom in

Console(config-if)#

15-11