Accton Technology 24/48-Port, ES4548D, ES4524D manual Snmp-server user, Field Description

40 SNMP Commands

	Table 40-4 show snmp group - display description (Continued)
Field		Description
security model		The SNMP version.
readview		The associated read view.
writeview		The associated write view.
notifyview		The associated notify view.
storage-type		The storage type for this entry.
Row Status		The row status of this entry.

snmp-server user

This command adds a user to an SNMP group, restricting the user to a specific SNMP Read, Write, or Notify View. Use the no form to remove a user from an SNMP group.

Syntax

snmp-server user username groupname [remote ip-address] {v1 v2c v3 [encrypted] [auth {md5 sha} auth-password[priv des56 priv-password]]

no snmp-server user username {v1 v2c v3 remote}

•username - Name of user connecting to the SNMP agent. (Range: 1-32 characters)

•groupname - Name of an SNMP group to which the user is assigned. (Range: 1-32 characters)

•remote - Specifies an SNMP engine on a remote device.

•ip-address- The Internet address of the remote device.

•v1 v2c v3 - Use SNMP version 1, 2c or 3.

•encrypted - Accepts the password as encrypted input.

•auth - Uses SNMPv3 with authentication.

•md5 sha - Uses MD5 or SHA authentication.

•auth-password- Authentication password. Enter as plain text if the encrypted option is not used. Otherwise, enter an encrypted password. (A minimum of eight characters is required.)

•priv des56 - Uses SNMPv3 with privacy with DES56 encryption.

•priv-password- Privacy password. Enter as plain text if the encrypted option is not used. Otherwise, enter an encrypted password.

Default Setting

None

Command Mode

Global Configuration

40-14