Accton Technology ES4524D Reload, Switch renumber, Syntax Switch all renumber Default Setting

34 System Management Commands

reload

This command restarts the system.

Note: When the system is restarted, it will always run the Power-On Self-Test. It will also retain all configuration information stored in non-volatile memory by the copy running-configstartup-configcommand.

Default Setting

None

Command Mode

Privileged Exec

Command Usage

This command resets the entire system.

Example

This example shows how to reset the switch:

Console#reload

System will be restarted, continue <y/n>? y

switch renumber

This command resets the switch unit identification numbers in the stack. All stack members are numbered sequentially starting from the top unit for a non-loop stack, or starting from the Master unit for a looped stack.

Note: This switch does not support stacking.

Syntax

switch all renumber

Default Setting

•For non-loop stacking, the top unit is unit 1.

•For loop stacking, the master unit is unit 1.

Command Mode

Global Configuration

Example

This example shows how to renumber all units.

Console#switch all renumber

Console#

34-2