Accton Technology 24/48-Port, ES4548D, ES4524D Vlan Commands, Gvrp and Bridge Extension Commands

Chapter 52: VLAN Commands

A VLAN is a group of ports that can be located anywhere in the network, but communicate as though they belong to the same physical segment. This section describes commands used to create VLAN groups, add port members, specify how VLAN tagging is used, and enable automatic VLAN registration for the selected interface.

Table 52-1 VLAN Commands

Command Groups	Function	Page
GVRP and Bridge Extension	Configures GVRP settings that permit automatic VLAN learning;	52-1
	shows the configuration for bridge extension MIB
Editing VLAN Groups	Sets up VLAN groups, including name, VID and state	52-5
Configuring VLAN	Configures VLAN interface parameters, including ingress and egress	52-7
Interfaces	tagging mode, ingress filtering, PVID, and GVRP
Configuring 802.1Q	Configures IEEE 802.1Q tunneling (QinQ) to segregate and preserve	52-13
Tunneling	customer VLAN IDs for traffic crossing the service provider network
Displaying VLAN	Displays VLAN groups, status, port members, and MAC addresses	52-16
Information

GVRP and Bridge Extension Commands

GARP VLAN Registration Protocol defines a way for switches to exchange VLAN information in order to automatically register VLAN members on interfaces across the network. This section describes how to enable GVRP for individual interfaces and globally for the switch, as well as how to display default configuration settings for the Bridge Extension MIB.

Table 52-2 GVRP and Bridge Extension Commands

Command	Function	Mode	Page
bridge-ext gvrp	Enables GVRP globally for the switch	GC	52-2
show bridge-ext	Shows the global bridge extension configuration	PE	52-2
switchport gvrp	Enables GVRP for an interface	IC	52-3
switchport forbidden vlan	Configures forbidden VLANs for an interface	IC	52-12
show gvrp configuration	Displays GVRP configuration for the selected interface	NE, PE	52-3
garp timer	Sets the GARP timer for the selected function	IC	52-4
show garp timer	Shows the GARP timer for the selected function	NE, PE	52-5

52-1