Manuals / Accton Technology / Computer Equipment / Switch

Accton Technology 24/48-Port, ES4548D, ES4524D manual Show interfaces switchport

Models: ES4524D 24/48-Port ES4548D

1 588

Download 588 pages 58.05 Kb

Page 416

45 Interface Commands

show interfaces switchport

This command displays the administrative and operational status of the specified interfaces.

Syntax

show interfaces switchport [interface]

interface

•ethernet unit/port

-unit - Stack unit. (Range: Always 1)

-port - Port number. (Range: 1-24/48)

•port-channel channel-id(Range: 1-24)

Default Setting

Shows all interfaces.

Command Mode

Normal Exec, Privileged Exec

Command Usage

If no interface is specified, information on all interfaces is displayed.

Example

This example shows the configuration setting for port 4.

Console#show interfaces switchport ethernet 1/4

Broadcast threshold:			Enabled, 500 packets/second
LACP status:			Disabled
Ingress rate limit:			Disable, 1000M bits per second
Egress rate limit:			Disable, 1000M bits per second
VLAN membership mode:			Hybrid
Ingress rule:			Disabled
Acceptable frame type:			All frames
Native VLAN:			19
Priority for Untagged Traffic:			0
GVRP Status:			Disabled
Allowed VLAN:			1(u), 19(u),4093(t),
Forbidden VLAN:
802.1Q-tunnel Status:			Enable
802.1Q-tunnel Mode:			Access
802.1Q-tunnel TPID:			8100(Hex)
Console#

Table 45-2 show interfaces switchport - display description

Field		Description

Broadcast threshold		Shows if broadcast storm suppression is enabled or disabled; if enabled it also
		shows the threshold level (page 47-1).
LACP status		Shows if Link Aggregation Control Protocol has been enabled or disabled
		(page 46-4).
Ingress/Egress rate limit		Shows if rate limiting is enabled, and the current rate limit (page 49-1).

45-10

Image 416

Accton Technology 24/48-Port, ES4548D, ES4524D manual Syntax Show interfaces switchport interface

Contents

Powered by Accton Page ES4524D Gigabit Ethernet Switch ES4524D ES4548D F0.0.0.4 E112006-CS-R01 149100030400A Contents Setting the System Clock 10-1 Access Control Lists 15-1 ViiVlan Configuration 23-1 ViiiMulticast Filtering 28-1 File Management Commands 35-1 Smtp Alert Commands 38-1 802.1X Port Authentication 43-1 XiiAccess Control List Commands 44-1 XiiiAddress Table Commands 50-1 XivPrivate Vlan Commands 53-1 Quality of Service Commands 56-1 XviIPv4 Interface Commands 59-1 XviiXviii Tables XixPage Xxi Xxii Figures XxiiiFigures IP Filter 12-14 Port Security 13-2 XxivFigures XxvXxvi Section I Getting Started Getting Started Key Features Key FeaturesFeature Description IntroductionDescription of Software Features IntroductionDescription of Software Features Introduction Description of Software Features System Defaults System DefaultsFunction Parameter Default Password superView defaultview SnmpSystem Defaults Function Parameter Traffic Prioritization Ingress Port Priority Queue ModeDisabled Igmp Snooping Snooping Enabled System Log Status Enabled Messages LoggedConfiguration Options Initial ConfigurationConnecting to the Switch Required Connections Remote ConnectionsConsole Connection Basic ConfigurationSetting Passwords Setting an IP Address Assigning an IPv4 AddressAssigning an IPv6 Address 45-159-1 59-260-4 60-1060-3 60-12Obtaining an IPv4 Address 59-359-4 35-2Obtaining an IPv6 Address 60-2Enabling Snmp Management Access 60-640-3 40-5Managing System Files 40-1040-11 40-14Saving Configuration Settings Initial Configuration Section II Switch Management Page Configuring the Switch Using the Web InterfaceNavigating the Web Browser Interface HomeWeb Page Configuration Buttons Panel DisplayApply Revert Help ActionSwitch Main Menu Description Main MenuSystem System Information IPv6 Neighbor11-1 12-815-1 12-13Lacp 17-1Class-of-service value 23-1Current Table 23-526-9 28-2Query Multicast Router 28-4Field Attributes Basic System SettingsDisplaying System Information System Information Displaying Switch Hardware/Software Versions CLI Specify the hostname, location and contact informationMain Board Management SoftwareSwitch Information 34-8Displaying Bridge Extension Configuration Displaying Bridge Extension CapabilitiesConfiguring Support for Jumbo Frames CLI Enter the following commandCommand Usage Command AttributesResetting the System CLI Use the reload command to restart the switchRenumbering the Stack CLI This example renumbers all units in the stackBasic System Settings Setting an IP Address Setting the Switch’s IP Address IP VersionManual Configuration IPv4 Interface Configuration ManualUsing DHCP/BOOTP IPv4 Interface Configuration DhcpConfiguring an IPv6 Address Setting the Switch’s IP Address IP Version 6 IP Address Setting the Switch’s IP Address IP Version 6 Current Address Table IPv6 Interface Configuration 60-14 Configuring an IPv6 General Network Prefix60-13 IPv6 General Prefix Configuration Protocol SettingsCurrent Neighbor Cache Table Adding Static Neighbors IPv6 Neighbor -- Add 60-22 60-26Managing System Files Managing FirmwareDownloading System Software from a Server Copy FirmwareDeleting Files 35-7Saving or Restoring Configuration Settings Downloading Configuration Settings from a Server Downloading Configuration Settings for Start-UpConsole#copy tftp startup-config Console Port Settings 36-1 36-236-3 36-4Telnet Settings Configuring the Telnet Interface Configuring Event Logging System Log ConfigurationError resource exhausted Logging LevelsRemote Log Configuration 37-137-2 37-537-3 37-4Displaying Log Messages Sending Simple Mail Transfer Protocol AlertsCLI This example shows the event message stored in RAM 37-7Enabling and Configuring Smtp Alerts 38-1 38-238-3 38-4Setting the System Clock Configuring SntpSetting the Time Zone 39-139-3 39-2Simple Network Management Protocol Snmp OverviewEnabling the Snmp Agent SNMPv3 Security Models and LevelsLevel Group Read View Write View Notify View Security User defined40-2 Setting Community Access StringsCLI The following example enables Snmp on the switch Specifying Trap Managers and Trap Types 11-5 Configuring SNMPv3 Management Access 40-7Setting a Local Engine ID Specifying a Remote Engine IDCLI This example sets an SNMPv3 engine ID 40-8Configuring SNMPv3 Users CLI This example specifies a remote SNMPv3 engine IDConfiguring SNMPv3 Users Configuring Remote SNMPv3 Users 40-15Configuring Remote SNMPv3 Users Configuring SNMPv3 Groups Topology Change Timer immediately Any of its configured ports transitions fromThat its configuration may have been altered Authenticated. While all implementationsSupported Notification Messages Configuring SNMPv3 Groups 40-13Setting SNMPv3 Views Configuring SNMPv3 Views11-17 Simple Network Management Protocol 11-18 User Authentication Configuring User AccountsConfiguring Local/Remote Logon Authentication 41-1Radius Settings Global Provides globally applicable Radius settingsWeb Telnet TACACS+ serverTacacs Settings Authentication Server SettingsConfiguring Https Replacing the Default Secure-site Certificate Copy Https Certificate Address server ip-addressConfiguring the Secure Shell Authenticating SSH v1.5 Clients Authenticating SSH v2 Clients Generating the Host Key Pair41-23 41-2041-21 Configuring the SSH Server SSH server includes basic settings for authenticationFiltering IP Addresses for Management Access 41-1741-18 41-1941-24 41-25Configuring Port Security Port Security 42-1Configuring 802.1X Port Authentication Displaying 802.1X Global Settings 802.1X protocol provides port authenticationCLI This example shows the default global setting for Web Click Security, 802.1X, InformationConfiguring 802.1X Global Settings Configuring Port Settings forCLI This example enables 802.1X globally for the switch 43-1802.1X Port Configuration Authorized43-5 43-243-4 Parameter Description Displaying 802.1X Statistics802.1X Statistics 802.1X Port Statistics CLI This example displays the dot1x statistics for portConfiguring 802.1X Port Authentication 14-8 Overview Access Control ListsSetting an ACL Name and Type 44-2 Configuring a Standard IPv4 ACLCLI This example creates a standard IP ACL named bill Configuring an Extended IPv4 ACL ACL Configuration Standard IPv415-4 ACL Configuration Extended IPv4 44-3Configuring a MAC ACL Configuring a Standard IPv6 ACL 44-13Configuring an Extended IPv6 ACL 44-815-9 ACL Configuration Extended IPv6 44-9Binding a Port to an Access Control List This switch supports ACLs for ingress filtering only44-6 44-15Access Control Lists 15-12 Field Attributes Web Port ConfigurationDisplaying Connection Status Configuration Field Attributes CLIBasic information Current statusCLI This example shows the connection status for Port 45-8Configuring Interface Connections 45-2 45-645-3 45-4Showing Port Statistics Rmon Statistics Port StatisticsEtherlike Statistics Fragments FormedOversize Frames 16-9 CLI This example shows statistics for port 45-9Creating Trunk Groups Statically Configuring a Trunk Static Trunk ConfigurationSetting a Load-Balance Mode for Trunks 46-2Trunk Load Balance Mode 46-11 Enabling Lacp on Selected Ports46-3 Lacp Trunk Configuration 46-4Configuring Lacp Parameters Dynamically Creating a Port ChannelLacp Aggregation Port Lacp Port Counters Displaying Lacp Port CountersYou can display statistics for Lacp protocol messages Parameter Description Marker Unknown Pkts TypeMarker Illegal Pkts Badly formed PDU or an illegal value of Protocol SubtypeField Description Displaying Lacp Settings and Status for the Local SideLacp Internal Configuration Information Lacp Port Internal Information Displaying Lacp Settings and Status for the Remote Side Lacp Neighbor Configuration Information Field Description17-14 Setting Broadcast Storm Thresholds Broadcast Storm Control47-1 45-10Configuring Port Mirroring Mirror Port Configuration 48-1Configuring Rate Limits Command Attribute49-1 Address Table Settings Setting Static AddressesDisplaying the Address Table 50-1Dynamic Addresses 50-350-4 Changing the Aging TimeCLI This example sets the aging time to 400 seconds Spanning Tree Algorithm Configuration Region R For this RegionDisplaying Global Settings 22-4 Web Click Spanning Tree, STA, Information STA InformationConfiguring Global Settings Global settings apply to the entire switchBasic Configuration of Global Settings Root Device ConfigurationConfiguration Settings for Rstp Configuration Settings for MstpSTA Global Configuration Displaying Interface Settings 22-11 STA Port Information 51-18 Configuring Interface SettingsCLI This example shows the STA attributes for port 22-14 Configuring Multiple Spanning Trees CLI This example sets STA attributes for portMstp Vlan Configuration 51-8 Displaying Interface Settings for Mstp Mstp Port InformationConfiguring Interface Settings for Mstp CLI This example sets the Mstp attributes for port 51-16Vlan Configuration Assigning Ports to VLANs23-2 Forwarding Tagged/Untagged Frames Displaying Basic Vlan Information Enabling or Disabling Gvrp Global SettingCLI This example enables Gvrp for the switch Max support Vlan numbers 256 Max support Vlan ID 4093 Command Attributes WebDisplaying Current VLANs 52-17 Command Attributes CLICreating VLANs Adding Static Members to VLANs Vlan Index CLI This example creates a new Vlan52-5 52-6Vlan Static Table Adding Static Members Adding Static Members to VLANs Port Index 52-11Configuring Vlan Behavior for Interfaces Vlan Port Configuration Configuring Ieee 802.1Q Tunneling Layer 2 Flow for Packets Coming into a Tunnel Access Port QinQ TunnelingLayer 2 Flow for Packets Coming into a Tunnel Uplink Port Configuration Limitations for QinQ General Configuration Guidelines for QinQEnabling QinQ Tunneling on the Switch CLI This example sets the switch to operate in QinQ mode52-14 52-16Adding an Interface to a QinQ Tunnel Tunnel Port Configuration 52-15Configuring Private VLANs CLI This example enables private VLANsEnabling Private VLANs 53-1Configuring Uplink and Downlink Ports 53-2Create a protocol group for one or more protocols Configuring Protocol-Based VLANsConfiguring Protocol Groups Mapping Protocols to VLANs 54-1Protocol Vlan Port Configuration 54-2Configuring Protocol-Based VLANs 25-4 Setting the Default Priority for Interfaces Class of Service ConfigurationLayer 2 Queue Settings CLI This example assigns a default priority of 5 to port 55-3Mapping CoS Values to Egress Queues Mapping CoS Values to Egress QueuesCoS Priority Levels Priority Level Traffic Type55-6 Selecting the Queue Mode55-4 55-5 Setting the Service Weight for Traffic Classes55-2 Queue Scheduling Layer 3/4 Priority Settings Mapping Layer 3/4 Priorities to CoS ValuesSelecting IP Precedence/DSCP Priority 55-8Mapping IP Precedence Mapping IP Precedence Priority Level Traffic Type10, 12, 14 18, 20, 22 26, 28, 30, 32, 34 38, 40 Mapping Dscp PriorityMapping Dscp Priority IP Dscp Value CoS Value 55-10 55-13Mapping IP Port Priority IP Port Priority Status55-11 Quality of Service Configuring Quality of Service ParametersConfiguring a Class Map Class ConfigurationMatch Class Settings Class map is used for matching packets to a specified classConfiguring Class Maps Creating QoS Policies Policy Map56-2 56-3Policy Options Policy ConfigurationPolicy Rule Settings Class Settings Configuring Policy Maps Attaching a Policy Map to Ingress Queues 56-456-5 56-6Quality of Service 27-8 Multicast Filtering Layer 2 Igmp Snooping and QueryConfiguring Igmp Snooping and Query Parameters 57-1 57-457-5 57-6Displaying Interfaces Attached to a Multicast Router 57-9Specifying Static Interfaces for a Multicast Router 57-8Displaying Port Members of Multicast Services IP Multicast Registration TableAssigning Ports to Multicast Services Igmp Member Port Table28-8 Configuring Domain Name Service Configuring General DNS Service Parameters58-3 58-458-5 58-7Configuring Static DNS Host to Address Entries 58-1 58-6Displaying the DNS Cache DNS Cache29-6 Switch Clustering Cluster ConfigurationCluster Member Configuration Web Click Cluster, ConfigurationAdds Candidate switches to the cluster as Members 61-1Web Click Cluster, Member Configuration Displays current cluster Member switch informationCluster Member Information 61-3Cluster Candidate Information 61-5Section IIICommand Line Interface Page Telnet Connection Using the Command Line InterfaceAccessing the CLI 31-2 Entering Commands Command CompletionGetting Help on Commands Keywords and ArgumentsShowing Commands Partial Keyword Lookup Negating the Effect of CommandsUsing Command History General Command Modes Understanding Command ModesExec Commands Configuration Commands Configuration Command Modes Prompt Consoleconfig-if# 45-1Keystroke Function Command Line ProcessingKeystroke Commands Using the Command Line Interface 31-10 CLI Command Groups Command Group Index Description57-1 Class of Service55-1 General Commands EnableDisable ConfigureRelated Commands ExampleShow history Normal Exec, Privileged ExecPrompt EndExit Syntax Prompt string no promptQuit This command exits the configuration programThis example shows how to quit a CLI session General Commands 33-6 System Management Commands System Management Commands Function ModeHostname Syntax Hostname name no hostnameReload Switch renumberSyntax Switch all renumber Default Setting Show startup-config Syntax No jumbo frame Default SettingJumbo frame Show ipv6 mtu34-4 Show running-config Show running-config34-5Show startup-config34-3 Show users This command displays system informationShow system Show version 34-9 System Management Commands 34-10 File Management Commands Saving or Restoring Configuration SettingsFlash/File Commands Function Mode Managing FirmwareCopy 35-3 This command deletes a file or image DeleteSyntax Delete unit filenameThis command displays a list of files in flash memory Syntax Dir unit boot-rom config opcode filenameDir Dir Delete public-key41-20Whichboot Syntax whichboot unitFile Directory Information Column Heading DescriptionDir 35-5 whichboot Boot systemSyntax Boot system unit boot-romconfig opcode filename File Management Commands 35-8 Line Commands Line Commands Function ModeLine Syntax Line console vtyLogin Syntax Login local no loginPassword Username 41-1 passwordSyntax Password 0 7 password no password No password is specifiedSyntax Exec-timeout seconds no exec-timeout Timeout login responseExec-timeout Password-thresh CLI No timeout Telnet 10 minutesSyntax Password-thresh threshold no password-thresh Default value is three attemptsSilent-time DatabitsSyntax Silent-time seconds no silent-time Syntax Databits 7 8 no databitsParity Syntax Parity none even odd no paritySpeed StopbitsSyntax Speed bps no speed Syntax Stopbits 1Disconnect Show lineSyntax Disconnect session-id Syntax Show line console vtyTo show all lines, enter this command Event Logging Commands Event Logging Commands Function ModeSyntax No logging on Default Setting Logging onLogging history 37-2 logging trap 37-4 clear log Flash errors level 3 RAM warnings level 7Logging history Default Setting Command Mode Logging hostLogging facility Syntax No logging host hostipaddressSyntax Logging trap level no logging trap Disabled Level 7Logging trap Clear log Show loggingSyntax Clear log flash ram Syntax Show logging flash ram sendmail trapShow logging trap display description Logging facility commandShow logging flash/ram display description Following example shows the event message stored in RAM Show logSyntax Show log flash ram Event Logging Commands 37-8 Smtp Alert Commands Smtp Alert Commands Function ModeLogging sendmail host 38-4Logging sendmail level Logging sendmail source-emailSyntax Logging sendmail level level Syntax Logging sendmail source-email email-addressSyntax No logging sendmail Default Setting Logging sendmail destination-emailLogging sendmail Syntax No logging sendmail destination-email email-addressShow logging sendmail Time Commands Time Commands Function ModeSyntax No sntp client Default Setting Sntp clientSyntax Sntp server ip1 ip2 ip3 Sntp serverSntp server 39-2 sntp poll 39-3 show sntp Sntp poll Show sntpSntp client 39-1 sntp poll 39-3 show sntp Syntax Sntp poll seconds no sntp pollClock timezone This command displays the system clock Calendar setShow calendar Calendar set hour min sec day month year month day yearTime Commands 39-6 Snmp Commands Snmp Commands Function ModeShow snmp Syntax No snmp-server Default SettingSnmp-server Snmp-server community Snmp-server contact Snmp-server locationSyntax Snmp-server contact string no snmp-server contact Syntax Snmp-server location text no snmp-server locationSnmp-server host Host Address None Notification Type TrapsSnmp Version UDP Port Issue authentication and link-up-down traps Snmp-server enable trapsSnmp-server enable traps Snmp-server engine-id Show snmp engine-id This command shows the Snmp engine IDThis example shows the default engine ID Defaultview includes access to the entire MIB tree Snmp-server viewExamples This view includes MIB-2This command shows information on the Snmp views Show snmp viewSnmp-server group Show snmp view display description40-12 Field Description Groupname Name of an Snmp group Show snmp groupShow snmp group display description Snmp-server user This command shows information on Snmp users Show snmp userShow snmp user display description User Authentication Commands User Account CommandsAuthentication Commands Command Group Function User Access Commands Function ModeGuest Admin Enable passwordDefault Login Settings Username Access-level Password Authentication Sequence Commands Function Mode Authentication SequenceAuthentication login Authentication enable Tacacs Use Tacacs server passwordUsername for setting the local user names and passwords LocalRadius Client Commands Function Mode Show radius-server Shows the current Radius settings 41-8Radius Client 41-8Default Setting Auth-port Retransmit Command ModeRadius-server host Radius-server portSyntax Radius-server key keystring no radius-server key Radius-server keyRadius-server retransmit Radius-server timeout Show radius-serverTACACS+ Client Commands Function Mode TACACS+ ClientTacacs-server host Tacacs-server portSyntax Tacacs-server key keystring no tacacs-server key Tacacs-server keyShow tacacs-server Ip http server Web Server CommandsIp http port Ip http port Syntax No ip http secure-server Default SettingIp http secure-server Portnumber The UDP port used for HTTPS. Range Ip http secure-portIp http secure-port41-13copy tftp https-certificate Ip telnet server Telnet Server CommandsTelnet Server Commands Function Mode Secure Shell Commands 10 Secure Shell Commands Function ModeConfiguration Guidelines Sets the SSH server key size 41-19 Copy tftp public-key41-16 Syntax No ip ssh server Default Setting Ip ssh serverIp ssh timeout Syntax Ip ssh timeout seconds no ip ssh timeoutExec-timeout36-4 show ip ssh Ip ssh crypto host-key generate 41-20 show sshIp ssh authentication-retries Ip ssh server-key sizeKey-size- The size of server key. Range 512-896 bits BitsDelete public-key Ip ssh crypto host-key generateSyntax Delete public-key username dsa rsa Syntax Ip ssh crypto host-key generate dsa rsaIp ssh crypto zeroize Ip ssh save host-keySyntax Ip ssh crypto zeroize dsa rsa Syntax Ip ssh save host-key dsa rsaThis command displays the current SSH server connections Show ip sshShow ssh Ip ssh crypto host-key generateSyntax Show public-key user username host Show public-keyTerminology IP Filter Commands 12 IP Filter Commands Function ModeManagement 41-25Show management 41-26 Port Security Commands Port Security Commands Function ModePort security Max-mac-countShutdown 45-6mac-address-table static 802.1X Port Authentication 802.1X Port Authentication Commands Function ModeSyntax No dot1x system-auth-control Default Setting Dot1x system-auth-controlDot1x default Default Command ModeDot1x max-req Dot1x port-controlSingle-host Dot1x operation-modeForce-authorized Dot1x re-authenticate Dot1x re-authenticationSyntax Dot1x re-authenticate interface Syntax No dot1x re-authentication Command ModeDot1x timeout quiet-period Dot1x timeout re-authperiodDot1x timeout re-authperiod43-5 Seconds The number of seconds. RangeDot1x timeout tx-period Show dot1xSyntax Show dot1x statistics interface interface Statistics Displays dot1x status for each port InterfaceAuthenticator State Machine Backend State MachineReauthentication State Machine State- Current state including initialize, reauthenticateAccess Control List Commands Access Control List Commands Command Groups FunctionIPv4 ACL Commands Function Mode IPv4 ACLsAccess-list ip Syntax No access-list ip standard extended aclnamePermit, deny Ip access-group44-6 show ip access-list44-5 Syntax No permit deny any source bitmask host sourceNo permit deny tcp Access-list ipStandard IPv4 ACL Extended IPv4 ACL Show ip access-list This command displays the rules for configured IPv4 ACLsSyntax Show ip access-list standard extended aclname Permit, deny Ip access-group44-6Ip access-group Show ip access-groupSyntax No ip access-group aclname Show ip access-list44-5Access-list ipv6 IPv6 ACL Commands Function ModeSyntax No access-list ipv6 standard extended aclname IPv6 ACLsNew rules are appended to the end of the list Access-list ipv6Standard IPv6 ACL Syntax No permit deny Any destination-ipv6-address/prefix-lengthNext-header next-header dscp dscp flow-label flow-label Extended IPv6 ACLShow ipv6 access-list This command displays the rules for configured IPv6 ACLsSyntax No ipv6 access-group aclname Ipv6 access-groupShow ipv6 access-group Access-list mac MAC ACL Commands Function ModeSyntax No access-list mac aclname MAC ACLsPermit, deny MAC ACL No permit deny tagged-eth2No permit deny untagged-eth2 No permit deny tagged-802.3Syntax Show mac access-list aclname Show mac access-listThis command displays the rules for configured MAC ACLs Syntax Mac access-group aclname Mac access-groupShow mac access-group Show access-list Show access-groupACL Information Commands Function Mode ACL Information44-17 Access Control List Commands 44-18 Interface Commands Interface Commands Function ModeInterface Port-channel channel-idRangeSyntax Description string no description DescriptionSpeed-duplex Negotiation 45-3 capabilities Syntax No negotiation Default SettingNegotiation Capabilities 45-4speed-duplex45-2 Following example configures port 11 to use autonegotiationCapabilities Syntax No flowcontrol Default Setting Following example enables flow control on portFlowcontrol Negotiation 45-3speed-duplex45-2 flowcontrolSyntax Media-type mode no media-type Syntax No shutdown Default SettingMedia-type ShutdownSyntax Clear counters interface Port-channel channel-idRange Default SettingClear counters This command displays the status for an interface Show interfaces statusSyntax Show interfaces status interface Shows the status for all interfacesThis command displays interface statistics Show interfaces countersSyntax Show interfaces counters interface Shows the counters for all interfacesShow interfaces switchport display description Show interfaces switchportSyntax Show interfaces switchport interface Indicates membership mode as Trunk or Hybrid Indicates the default priority for untagged framesAllowed Vlan Indicates taggedInterface Commands 45-12 Guidelines for Creating Trunks Link Aggregation CommandsLink Aggregation Commands Syntax Channel-group channel-idno channel-group Channel-groupDynamically Creating a Port Channel Port channel load-balance Src-dst-ipSyntax No lacp Default Setting LacpLacp system-priority 32768Lacp admin-keyEthernet Interface Interface Configuration Port Channel Lacp admin-key Port ChannelSyntax Lacp admin-key key no lacp admin-key Show lacp This command displays Lacp informationLacp port-priority Port Channel all Show lacp counters display descriptionType LACPDUs Illegal PktsShow lacp internal display description Show lacp neighbors display descriptionShow port-channel load-balance Show lacp sysid display description46-12 Broadcast Storm Control Commands Switchport broadcast packet-rateBroadcast Storm Control Commands Function Mode Enabled for all ports Packet-rate limit 500 ppsBroadcast Storm Control Commands 47-2 Mirror Port Commands Mirror Port Commands Function ModeInterface Configuration Ethernet, destination port Port monitorThis command displays mirror information Following shows mirroring configured from port 6 to portShow port monitor Syntax Show port monitor interfaceRate Limit Commands Rate Limit Commands Function ModeRate-limit Gigabit Ethernet 1000 MbpsRate Limit Commands 49-2 Address Table Commands Address Table Commands Function ModeMac-address-table static ActionClear mac-address-table dynamic Show ipv6 neighbors Show mac-address-tableMac-address- MAC address Mask Bits to match in the address Mac-address-table aging-time Show mac-address-table aging-timeSpanning Tree Commands Spanning Tree Commands Function ModeSpanning-tree mode Syntax No spanning-tree Default SettingSpanning tree is enabled Spanning-treeSpanning-tree forward-time Spanning-tree forward-timeSpanning-tree hello-time Spanning-tree forward-time 51-3spanning-tree max-ageSpanning-tree forward-time 51-3spanning-tree hello-time Spanning-tree max-ageSpanning-tree priority Spanning-tree pathcost method Long methodSpanning-tree mst-configuration This command limits the maximum transmission rate for BPDUsSpanning-tree transmission-limit Count The transmission limit in seconds. RangeNo mst instanceid vlan vlan-range MST ConfigurationMst vlan Mst priority NameMst instanceid priority priority no mst instanceid priority Syntax Name nameRevision Syntax Revision numberNumber Revision number of the spanning tree. Range NameSpanning-tree spanning-disabled Syntax No spanning-tree spanning-disabled Default SettingThis example disables the spanning tree algorithm for port Max-hopsSpanning-tree cost Syntax Spanning-tree cost cost no spanning-tree costSyntax No spanning-tree edge-port Default Setting Spanning-tree port-prioritySpanning-tree edge-port Priority The priority for a port. Range 0-240, in stepsSyntax No spanning-tree portfast Default Setting Spanning-tree portfastSpanning-tree link-type Spanning-treeedge-port51-13Spanning-tree mst cost Spanning-tree mst port-priority51-17Syntax Spanning-tree protocol-migration interface Spanning-tree mst port-prioritySpanning-tree protocol-migration Show spanning-tree Syntax Show spanning-tree interface mst instanceid51-19 Show spanning-tree mst configuration Vlan Commands Gvrp and Bridge Extension CommandsVlan Commands Command Groups Function Gvrp and Bridge Extension Commands Function ModeShow bridge-ext Syntax No bridge-ext gvrp Default SettingBridge-ext gvrp Switchport gvrp Show gvrp configurationSyntax No switchport gvrp Default Setting Syntax Show gvrp configuration interfaceGarp timer Show garp timer Syntax Show garp timer interfaceCommands for Editing Vlan Groups Function Mode Editing Vlan GroupsBy default only Vlan 1 exists and is active Vlan Database ConfigurationVlan Show vlanConfiguring Vlan Interfaces Commands for Configuring Vlan Interfaces Function ModeInterface vlan Interface vlanSwitchport mode Syntax Switchport mode hybrid trunk no switchport modeAll ports are in hybrid mode with the Pvid set to Vlan Switchport acceptable-frame-types52-9Switchport acceptable-frame-types Switchport ingress-filteringSwitchport mode Syntax No switchport ingress-filtering Default SettingSwitchport native vlan Switchport allowed vlan Switchport forbidden vlan No VLANs are included in the forbidden listIeee 802.1Q Tunneling Commands Function Mode General Configuration Guidelines for QinQDot1q-tunnel 52-14Syntax No dot1q-tunnel system-tunnel-control Default Setting Show dot1q-tunnel52-16 Show interfaces switchportSwitchport dot1q-tunnel tpid 0x8100Commands for Displaying Vlan Information Function Mode Displaying Vlan InformationThis command shows Vlan information Following example shows how to display information for VlanShow vlan Syntax Show vlan id vlan-idname vlan-nameVlan Commands 52-18 Private Vlan Commands Private Vlan Commands Function ModePvlan No private VLANs are definedThis command displays the configured private Vlan Show pvlanProtocol-based Vlan Commands Protocol-vlan protocol-group Configuring GroupsProtocol-based Vlan Commands Function Mode 54-4No protocol groups are mapped for any interface Protocol-vlan protocol-group ConfiguringNo protocol groups are configured This shows protocol group 1 configured for IP over Ethernet Show protocol-vlan protocol-groupSyntax Show protocol-vlan protocol-group group-id Group-id- Group identifier for a protocol group. RangeShow interfaces protocol-vlan protocol-group Mapping for all interfaces is displayedClass of Service Commands Priority Commands LayerPriority Commands Command Groups Function Priority Commands Layer Function ModeQueue mode Syntax Queue mode strict wrr no queue modeWeighted Round Robin Queue bandwidth 55-4 show queue modeSwitchport priority default Queue bandwidth weight1...weight4 no queue bandwidth Queue bandwidthQueue cos-map Queue cos-mapqueueid cos1 ... cosn no queue cos-mapShow queue mode Default CoS Priority LevelsThis command shows the current queue mode Show queue cos-map55-6This command shows the class of service priority map Show queue bandwidthShow queue cos-map Syntax Show queue cos-map interfaceSyntax No map ip port Default Setting Priority Commands Layer 3Priority Commands Layer 3 Function Mode Following example shows how to map Http traffic to CoS value Syntax No map ip precedence Default SettingMap ip precedence Interface Configuration List below shows the default priority mappingSyntax No map ip dscp Default Setting Map ip dscp dscp-value cos cos-value no map ip dscpThis command shows the IP port priority map Show map ip portMapping IP Dscp to CoS Values IP Dscp Value Syntax Show map ip port interfaceSyntax Show map ip precedence interface This command shows the IP precedence priority mapShow map ip precedence Syntax Show map ip dscp interface This command shows the IP Dscp priority mapShow map ip dscp 55-14 Quality of Service Commands Quality of Service Commands Function ModeShow class map Class-mapSyntax No class-map class-map-namematch-any Class Map Configuration MatchPolicy-map ClassNo policy-mappolicy-map-name No class class-map-namePolicy Map Configuration SetPolicy Map Class Configuration PoliceSyntax No police rate-kbpsburst-byteexceed-action drop set Drop out-of-profile packetsNo policy map is attached to an interface Service-policySyntax No service-policy input policy-map-name Show class-map Show policy-mapSyntax Show class-map class-map-name Show policy-mappolicy-map-name class class-map-nameSyntax Show policy-map interface interface input Port-channel channel-idRange Command ModeShow policy-map interface Quality of Service Commands 56-10 Ip igmp snooping Multicast Filtering CommandsIgmp Snooping Commands Igmp Version Ip igmp snooping vlan staticIp igmp snooping version Show ip igmp snooping Show mac-address-table multicastIgmp Query Commands Igmp Query Commands Function ModeSyntax No ip igmp snooping querier Default Setting Ip igmp snooping querierFollowing shows how to configure the query count to Ip igmp snooping query-countIp igmp snooping query-interval TimesSeconds The report delay advertised in Igmp queries. Range Ip igmp snooping query-max-response-timeSwitch must use IGMPv2 for this command to take effect Ip igmp snooping router-port-expire-timeStatic Multicast Routing Commands Static Multicast Routing Commands Function ModeNo static multicast router ports are configured Ip igmp snooping vlan mrouterDisplays multicast router ports for all configured VLANs Show ip igmp snooping mrouterMulticast Filtering Commands 57-10 Domain Name Service Commands DNS Commands Function ModeIp host No ip host name address1 address2 … address8This command deletes entries from the DNS table Clear hostThis example maps two address to a host name Syntax Clear host nameIp domain-name Ip domain-listSyntax Ip domain-name name no ip domain-name Ip domain-list58-3 ip name-server58-4 ip domain-lookup58-5Server-address1- IP address of domain-name server Ip name-serverIp domain-name58-3 Ip domain-name58-3 ip domain-lookup58-5 Syntax No ip domain-lookup Default SettingIp domain-lookup Show hosts Ip domain-name58-3 ip name-server58-4Show dns cache display description Show dnsShow dns cache This command clears all entries in the DNS cache Clear dns cacheIp address IPv4 Interface CommandsIPv4 Configuration Commands Function Mode Ip default-gateway Syntax Ip default-gateway gateway no ip default-gatewayGateway IP address of the default gateway Ip dhcp restart 59-3 ipv6 addressFollowing example defines a default gateway for this device Show ip redirects 59-4 ipv6 default-gateway60-12This command submits an IPv4 Bootp or Dhcp client request Ip dhcp restartThis command displays the settings of an IPv4 interface Ip default-gateway59-2 Show ipv6 default-gateway60-12Show ip interface Show ip redirectsThis command has no default for the host PingSyntax Ping host count countsize size Interface 45-1 ping ipv659 IPv4 Interface Commands 59-6 IPv6 Interface Commands IPv6 Configuration CommandsIpv6 enable Syntax No ipv6 enable Default SettingIPv6 is disabled Ipv6 address link-local60-9 show ipv6 interfaceShow ipv6 general-prefix60-4 Ipv6 general-prefixNo general prefix is defined This command displays all configured IPv6 general prefixes Show ipv6 general-prefixIpv6 address No IPv6 addresses are defined60-5 Ipv6 address autoconfig Syntax No ipv6 address autoconfig Default SettingIpv6 address eui-64 Ipv6 address Show ipv6 interfaceIpv6 address autoconfig 60-6 show ipv6 interface Ipv6 address link-local Show ipv6 interface display description Field Ipv6 enable Show ipv6 interfaceShow ipv6 interface Show ipv6 interface display description FF022, and solicited nodes FF021FFXXXXXX as described belowAppending those bits to the prefix Maximum transmission unit for this interfaceSyntax Ipv6 default-gateway ipv6-addressno ipv6 address Ipv6 default-gatewayShow ipv6 default-gateway Ipv6 mtu Syntax Ipv6 mtu size no ipv6 mtuShow ipv6 mtu Show ipv6 trafficFollowing example shows the MTU cache for this device Show ipv6 mtu display description60-15 Received in error Format errorsErrors discovered in processing their IPv6 options, etc Ipv6 rcvd Rcvd totalShow ipv6 traffic display description Ipv6 sentChecksum errors Ipv6 icmp input InputInput interface for the messages Prohibited messages received by the interfaceIpv6 icmp output Clear ipv6 traffic Repeat 5 timeout 2 seconds Ping ipv6Ipv6 neighbor Syntax Ipv6 nd dad attempts count no ipv6 nd dad attempts Ipv6 nd dad attemptsShow ipv6 neighbors 60-26mac-address-table static Ipv6 nd ns interval 60-25 show ipv6 neighbors Ipv6 nd ns interval Milliseconds is used for neighbor discovery operationsShow ipv6 neighbors display description Field Description Show ipv6 neighborsSyntax Show ipv6 neighbors vlan vlan-id ipv6-address Clear ipv6 neighbors Show ipv6 neighbors display description60 IPv6 Interface Commands 60-28 Switch Cluster Commands Switch Cluster Commands Function ModeSyntax No cluster Default Setting ClusterCluster commander Syntax No cluster commander Default SettingCluster ip-pool Syntax Cluster ip-pool ip-addressno cluster ip-poolCluster member No MembersRcommand Syntax Rcommand id member-idMember-id- The ID number of the Member switch. Range This command shows the switch clustering configurationShow cluster candidates This command shows the current switch cluster membersShow cluster members Switch Cluster Commands 61-6 Section IVAppendices Appendices Appendix a Software Specifications Software FeaturesManagement Features Groups 1, 2, 3, 9 Statistics, History, Alarm, EventStandards Icmp RFC Igmp RFCManagement Information Bases Management Information Bases aSoftware Specifications Appendix B Troubleshooting Problems Accessing the Management InterfaceTable B-1 Troubleshooting Chart Symptom ActionUsing System Logs Access Control List ACL GlossaryExtended Universal Identifier EUI See Generic Attribute Registration ProtocolIeee 802.1Q Defines frame extensions for Vlan taggingIP Precedence See Port TrunkPort Mirroring See IeeeSecure Shell SSH TCP/IP protocol commonly used for software downloadsUser Datagram Protocol UDP Glossary Glossary-8 Index NumericsIndex-2 Index-3 Index-4 Page ES4524D ES4548D E112006-CS-R01 149100030400A