Accton Technology ES4524D, ES4548D, 24/48-Port manual Authentication Sequence, Authentication login

Authentication Sequence 41

Default Setting

•The default is level 15.

•The default password is “super”

Command Mode

Global Configuration

Command Usage

•You cannot set a null password. You will have to enter a password to change the command mode from Normal Exec to Privileged Exec with the enable command (page 33-1).

•The encrypted password is required for compatibility with legacy password settings (i.e., plain text or encrypted) when reading the configuration file during system bootup or when downloading the configuration file from a TFTP server. There is no need for you to manually configure encrypted passwords.

Example

Console(config)#enable password level 15 0 admin

Console(config)#

Related Commands

enable (33-1) authentication enable (41-4)

Authentication Sequence

Three authentication methods can be specified to authenticate users logging into the system for management access. The commands in this section can be used to define the authentication method and sequence.

Table 41-4 Authentication Sequence Commands

Command	Function	Mode	Page
authentication login	Defines logon authentication method and precedence	GC	41-3
authentication enable	Defines the authentication method and precedence for	GC	41-4
	command mode change

authentication login

This command defines the login authentication method and precedence. Use the no form to restore the default.

Syntax

authentication login {[local] [radius] [tacacs]} no authentication login

•local - Use local password.

•radius - Use RADIUS server password.

41-3