Accton Technology ES4548D, ES4524D, 24/48-Port manual 40-12

40 SNMP Commands

•writeview - Defines the view for write access. (1-64 characters)

•notifyview - Defines the view for notifications. (1-64 characters)

Default Setting

•Default groups: public1 (read only), private2 (read/write)

•readview - Every object belonging to the Internet OID space (1.3.6.1).

•writeview - Nothing is defined.

•notifyview - Nothing is defined.

Command Mode

Global Configuration

Command Usage

•A group sets the access policy for the assigned users.

•When authentication is selected, the MD5 or SHA algorithm is used as specified in the snmp-server user command.

•When privacy is selected, the DES 56-bit algorithm is used for data encryption.

•For additional information on the notification messages supported by this switch, see “Supported Notification Messages” on page 11-13.Also, note that the authentication, link-up and link-down messages are legacy traps and must therefore be enabled in conjunction with the snmp-server enable traps command (page 40-7).

Example

Console(config)#snmp-server group r&d v3 auth write daily Console(config)#

1.No view is defined.

2.Maps to the defaultview.

40-12