Accton Technology ES4548D, ES4524D, 24/48-Port manual Vlan Static Table Adding Static Members

23 VLAN Configuration

Command Attributes

•VLAN – ID of configured VLAN (1-4093).

•Name – Name of the VLAN (1 to 32 characters).

•Status – Enables or disables the specified VLAN.

-Enable: VLAN is operational.

-Disable: VLAN is suspended; i.e., does not pass packets.

•Port – Port identifier.

•Trunk – Trunk identifier.

•Membership Type – Select VLAN membership for each interface by marking the appropriate radio button for a port or trunk:

-Tagged: Interface is a member of the VLAN. All packets transmitted by the port will be tagged, that is, carry a tag and therefore carry VLAN or CoS information.

-Untagged: Interface is a member of the VLAN. All packets transmitted by the port will be untagged, that is, not carry a tag and therefore not carry VLAN or CoS information. Note that an interface must be assigned to at least one group as an untagged port.

-Forbidden: Interface is forbidden from automatically joining the VLAN via GVRP. For more information, see “Automatic VLAN Registration” on page 23-2.

-None: Interface is not a member of the VLAN. Packets associated with this VLAN will not be transmitted by the interface.

•Trunk Member – Indicates if a port is a member of a trunk. To add a trunk to the selected VLAN, use the last table on the VLAN Static Table page.

Web – Click VLAN, 802.1Q VLAN, Static Table. Select a VLAN ID from the scroll-down list. Modify the VLAN name and status if required. Select the membership type by marking the appropriate radio button in the list of ports or trunks. Click Apply.

Figure 23-5 VLAN Static Table - Adding Static Members

23-8