Zebra Technologies 14245L-003 manual Enable Error Reporting, 159, Syntax USp1

EPL Commands

US

159

US

Enable Error Reporting

Description Use this command to enable the printer’s status reporting feature.

•Serial Port

•If an error occurs, the printer will send a NACK(0x15), followed by the error number, to the computer.

•If no errors occur, the printer will echo ACK(0x6) after each label is printed or removed if in dispense (peel) mode.

•If paper or ribbon empty occurs, the printer will send, through the serial port, a”-07” and “Pnnn” where nnn is the number of labels remaining to print.

•Parallel Port

•If an error occurs, the printer will print the error number and the printer’s indicator(s) LED will indicate an error condition. See the individual printer’s user manual for details.

•Mobile Printers Only (TR220)

•Additionally enables command error reporting via printer’s status indicator. The indicator is turned off by default for this printer only.

Note • The printer’s default setting is disabled error reporting.

If enabled, use the UN command to disable error reporting.

Syntax US[p1]

12/16/13 EPL Programming Guide 14245L-003 Rev. A