FULL MENU settings - Default setting

CONTENTS

You can set the Input source, projection mode, etc. from FULL MENU [Default setting].

The relationship between input source and item

Yes: Adjustable -: Not displayed

To operate FULL MENU, refer to page 44 .

Analog RGB(1)

Analog RGB(2)

Digital RGB

Y/PB/PR

Video

S-Video

Camera

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Input source setting

 

 

COMPUTER IN 1

SET

: COMPUTER IN 1 connector is selectable with the INPUT button.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

: On/Off with ENTER

 

 

 

Analog RGB(1)

SET

: Use COMPUTER IN 1 connector as Analog RGB (1) input.

 

 

 

 

 

 

 

 

 

 

Y/PB/PR

SET

: Use COMPUTER IN 1 connector as Y/PB/PR input.

 

 

 

 

 

 

 

: On/Off with ( ) or (

)

 

 

 

 

 

 

 

 

 

 

 

 

COMPUTER IN 2

SET

: COMPUTER IN 2 connector is selectable with the INPUT button.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Analog RGB(2)

SET

: Use COMPUTER IN 2 connector as Analog RGB (2) input.

 

Yes (common for all of the inputs)

 

 

 

 

Digital RGB

SET

: Use COMPUTER IN 2 connector as Digital RGB input.

 

 

 

 

 

 

 

 

 

 

VIDEO

SET

: Video input is selectable with the INPUT button.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

S-VIDEO

SET

: S-Video input is selectable with the INPUT button.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CAMERA

SET

: Camera input is selectable with the INPUT button.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Projection mode

 

 

Standard

SET

The projector is set to the floor-mounted front projection mode.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Rear

SET

The projector is set to the floor-mounted rear projection mode.

 

Yes (common for all of the inputs)

 

 

 

 

 

 

 

Ceiling

SET

The projector is set to the ceiling-mounted front projection mode.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Rear ceiling

SET

The projector is set to the ceiling-mounted rear projection mode.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Background

 

 

Logo

SET

The TOSHIBA logo is displayed when no signal is input.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Blue

SET

The entire screen is set to blue when no signal is input.

 

Yes (common for all of the inputs)

 

 

 

 

 

 

None

SET

Nothing is displayed when no signal is input.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

No signal power off

 

 

Off

SET

The power does not turn off automatically even if no signal status continues.

 

Yes (common for all of the inputs)

 

 

 

 

 

 

5 min.

SET

The power turns off automatically when no signal status continues for approx. 5 min.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Power on

 

 

Manual

SET

The power turns on by pressing the ON/STANDBY button.

 

Yes (common for all of the inputs)

 

 

 

 

 

 

Auto

SET

When the power plug is inserted, the power is on.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Start-up screen

 

 

On

SET

The start-up display appears when the power is turned on.

 

Yes (common for all of the inputs)

 

 

 

 

 

 

Off

SET

The start-up display does not appear when the power is turned on.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Reset

EXEC.

Return the settings of FULL MENU [Default setting] to the factory default values.

 

Yes (common for all of the inputs)

51

Settings

Adjustments

 

&

 

 

Notes

It is impossible to exit from the menu if no input source is selected.

If the check in the check box for the currently selected source is removed, the setting becomes effective the next time the input is changed.

In the following conditions, the function to detect no signal (“No signal background”, “No signal power off”) does not activate:

1)When “Video mode” 46 is set to the modes other than [Auto] and Video input or S-Video input is selected.

2)When “Signal format” 46 is set to the modes other than [Auto] and Y/PB/PR input is selected.

Note that the projector automatically powers up at the restoration of power after a failure, if “Power on” is set to [Auto] with the power plug inserted.

Even if “Power on” is set to [Auto], the setting of [5 min.] of “No signal power off” is effective.

Each item can be set at all input sources, but the settings made at one input source are applied in common to all input sources.

The settings made are memorized automatically when the power is turned off by pressing the ON/STANDBY button. If the power cord is un-plugged or if a power failure occurs while the projector is on, the settings are not memorized.

Page 51
Image 51
Toshiba TLP381, TLP380 owner manual Full Menu settings Default setting

TLP381, TLP380 specifications

The Toshiba TLP380 and TLP381 are advanced optoisolators designed for various applications requiring reliable isolation and switching control. These devices are particularly valuable in communication, industrial, and consumer electronics, where signal integrity and noise immunity are crucial.

The TLP380 is a phototransistor optoisolator, featuring a gallium arsenide infrared LED and a phototransistor. With a minimum isolation voltage of 5,000 VRMS, it provides high voltage isolation between input and output, making it an excellent choice for protecting sensitive components from high voltages and surges. The TLP380 offers a high-speed switching capability, with a rise time of around 4 μs, enabling it to transmit signals efficiently in digital circuits.

On the other hand, the TLP381 is also a phototransistor optoisolator but specifically optimized for lower input current, making it more power-efficient. It offers similar isolation voltage ratings and switching characteristics to the TLP380, but with a lower input current threshold, which can be particularly advantageous in battery-powered applications. The lower current requirement helps extend battery life and minimizes power consumption in portable devices.

Both TLP380 and TLP381 devices feature a wide temperature range, making them suitable for various environmental conditions. Their operating temperature ranges from -40°C to +100°C, ensuring reliable performance under extreme conditions. Additionally, with their compact DIP packages, they are easy to integrate into crowded PCB layouts, making them a preferred choice for designers targeting space-constrained applications.

In terms of characteristics, both models provide low output voltage saturation and high-speed operation, which are critical in achieving fast response times in control circuits. The combination of robust isolation, efficient power consumption, and temperature stability makes the TLP380 and TLP381 versatile solutions for isolating signals in a myriad of electronic systems.

In summary, the Toshiba TLP380 and TLP381 optoisolators are engineered for high-performance signal isolation, offering superior technologies and characteristics that cater to a range of applications. Their reliability, efficiency, and compact design make them a compelling choice for engineers and designers looking to enhance their electronic systems.