Loading batteries

CONTENTS

15

Notes

Using batteries incorrectly can cause them to leak or burst. Strictly observe the following.

Install the batteries with their + and – ends facing correctly.

Do not charge, heat, disassemble, or short the batteries or throw them into a fire.

Do not leave any exhausted batteries in the remote control.

Do not mix different types of batteries or new and old batteries.

When you will not be using the remote control for a prolonged period, take the batteries out of the remote control.

When the remote control stops working or only works at very close range, replace all the batteries with new ones.

When replacing the batteries, use longer life alkaline batteries.

If a battery has leaked, carefully wipe off any residue inside the battery case before loading new batteries.

1

2

Bottom side

Open the cover.

 

Install the batteries.

Make sure that the +/– polarities match the illustration in the compartment.

Before use

3

Attach the cover.

 

Page 15
Image 15
Toshiba TLP381, TLP380 owner manual Loading batteries, Open the cover, Install the batteries, Attach the cover, Bottom side

TLP381, TLP380 specifications

The Toshiba TLP380 and TLP381 are advanced optoisolators designed for various applications requiring reliable isolation and switching control. These devices are particularly valuable in communication, industrial, and consumer electronics, where signal integrity and noise immunity are crucial.

The TLP380 is a phototransistor optoisolator, featuring a gallium arsenide infrared LED and a phototransistor. With a minimum isolation voltage of 5,000 VRMS, it provides high voltage isolation between input and output, making it an excellent choice for protecting sensitive components from high voltages and surges. The TLP380 offers a high-speed switching capability, with a rise time of around 4 μs, enabling it to transmit signals efficiently in digital circuits.

On the other hand, the TLP381 is also a phototransistor optoisolator but specifically optimized for lower input current, making it more power-efficient. It offers similar isolation voltage ratings and switching characteristics to the TLP380, but with a lower input current threshold, which can be particularly advantageous in battery-powered applications. The lower current requirement helps extend battery life and minimizes power consumption in portable devices.

Both TLP380 and TLP381 devices feature a wide temperature range, making them suitable for various environmental conditions. Their operating temperature ranges from -40°C to +100°C, ensuring reliable performance under extreme conditions. Additionally, with their compact DIP packages, they are easy to integrate into crowded PCB layouts, making them a preferred choice for designers targeting space-constrained applications.

In terms of characteristics, both models provide low output voltage saturation and high-speed operation, which are critical in achieving fast response times in control circuits. The combination of robust isolation, efficient power consumption, and temperature stability makes the TLP380 and TLP381 versatile solutions for isolating signals in a myriad of electronic systems.

In summary, the Toshiba TLP380 and TLP381 optoisolators are engineered for high-performance signal isolation, offering superior technologies and characteristics that cater to a range of applications. Their reliability, efficiency, and compact design make them a compelling choice for engineers and designers looking to enhance their electronic systems.