EPL Commands
B
58
14245L-003 Rev. A EPL Programming Guide 12/16/13
B
RSS-14 Bar Code Specific Options
Description Use this command to print RSS-14 bar code family bar codes for numeric data.
The printer supports a subset of the RSS bar code family set. The subset includes basic RSS-
14, RSS Limited, RSS Stacked and RSS Truncated. The printer does not support RSS
Expanded or two dimensional composite bar codes.
Printer Models: G-Series, 3842*, and 2844*
* Available as a firmware download from the www.zebra.com website.
Syntax Bp1,p2,p3,p4,p5,p6,p7,p8,”DATA”
Parameters This table identifies the parameters for this format:
Parameters Details
p1 = Horizontal start
position
Horizontal start position (X) in dots.
p2 = Vertical start position Vertical start position (Y) in dots.
p3 = Rotation Accepted Values:
0 = normal (no rotation)
1 = 90 degrees
2 = 180 degrees
3 = 270 degrees
p4 = RSS-14 Bar Code
selection
p5 = Narrow bar width Narrow bar width in dots.
Accepted Values: 1-10
The narrowest module will be this number of dots.
Symbol Width is the value of p5 times the applicable bar code
Width Multiplier listed in the table for the selected RSS-14
bar code type (p4). This overall symbol width value includes
the required symbol "quite zone".
p6 = Wide bar width Wide bar width in dots.
Accepted Values: 2
p7 = Bar code height Bar code height in dots.
Value Description Width
Multiplier
Min. Height
Multiplier
R14 Basic RSS-14 96 33
RL Limited 74 10
RS Stacked 50 13
RT Truncated 96 13