Zebra Technologies 14245L-003 manual Wlan.kerberos.password, 288

288

SGD Wireless Commands

wlan.kerberos.password

wlan.kerberos.password

Description This printer setting refers to the Kerberos password. The password must correspond to a user profile established on the Kerberos KDC server in use. For printer support, see SGD Command Support on page 315.

Type getvar; setvar

Note • For details on SGD command structure, see Command Structure on page 250.

This table identifies the commands for this format:

Commands	Details
getvar	This command instructs the printer to respond with the current Kerberos
	password.
	Format: ! U1 getvar "wlan.kerberos.password"
	For protection a single "*" prints.
setvar	This command instructs the printer to set the Kerberos password.
	Format: ! U1 setvar "wlan.kerberos.password" "value"
	Values: 0-32 alphanumeric characters
	Default: "password"

Example • This setvar example shows the value set to "password".

!U1 setvar "wlan.kerberos.password" "password"

When the setvar value is set to "password", the getvar result is "*".

14245L-003 Rev. A EPL Programming Guide 12/16/13