154

EPL Commands

UI

UI

Host Prompts/Codepage Inquiry

Description This command will cause the printer to enable prompts to be sent to the host and it will send the currently selected codepage to the host through the RS-232 port.

This command also disables software flow control (XON/XOFF). Hardware flow control is not disabled (DTR/CTS). To restart software flow control a reset (^@ command) or power must be recycled.

See also the I and U commands.

Syntax UIp1,p2,p3

Parameters This table identifies the parameters for this format:

Parameters

Details

The printer will send information about the currently selected code page back to the host in the following format:

p1

p2

p3

Number of data bits.

Code page.

Country code.

Note • The KDU automatically sends this command each time power is applied.

Example •

UI

14245L-003 Rev. A

EPL Programming Guide

12/16/13

Page 154
Image 154
Zebra Technologies 14245L-003 manual Host Prompts/Codepage Inquiry, 154, Syntax UIp1,p2,p3