Zebra Technologies 14245L-003 manual Wlan.wep.key3, 311, U1 setvar wlan.wep.key3 A1B2C3D4F5

SGD Wireless Commands

wlan.wep.key3

311

wlan.wep.key3

Description This printer setting refers to the third indexed WEP encryption key. The WEP encryption key is a hexadecimal string value. This key should match the wireless network WEP encryption key 3. For printer support, see SGD Command Support on page 315.

Type getvar; setvar

Note • For details on SGD command structure, see Command Structure on page 250.

This table identifies the commands for this format:

Commands	Details
getvar	This command instructs the printer to respond with the encryption key.
	Format: ! U1 getvar "wlan.wep.key3"
	Format: For protection a single "*" prints.
setvar	This command instructs the printer to set the encryption key.
	Format: ! U1 setvar "wlan.wep.key3" "value"
	Values:
	10 hexadecimal characters for 40-bit encryption
	26 hexadecimal characters for 128-bit encryption
	Default: All zeros

Example • This setvar example shows the value set to "A1B2C3D4F5".

! U1 setvar "wlan.wep.key3" "A1B2C3D4F5"

When the setvar value is set to "A1B2C3D4F5", the getvar result is "*".

12/16/13 EPL Programming Guide 14245L-003 Rev. A