Zebra Technologies 14245L-003 manual Wlan.ip.dhcp.cidsuffix, 277

SGD Wireless Commands

wlan.ip.dhcp.cid_suffix

277

wlan.ip.dhcp.cid_suffix

Description This printer setting defines the unique suffix to be used as the client identifier (DHCP option 61) if DHCP is enabled on the wireless print server and "wlan.ip.dhcp.cid_type" is set to "0" or "2". For printer support, see SGD Command Support on page 315.

Type getvar; setvar

Note • For details on SGD command structure, see Command Structure on page 250.

This table identifies the commands for this format:

Commands	Details
getvar	This command instructs the printer to respond with the client identifier
	suffix on the wireless print server.
	Format:
	! U1 getvar "wlan.ip.dhcp.cid_suffix"
setvar	This command instructs the printer to change the client identifier suffix
	value on the wireless print server.
	Format:
	! U1 setvar "wlan.ip.dhcp.cid_suffix" "value"
	Values: The maximum length of a value allowed is 60 ASCII characters
	when the CID type is ASCII, or 120 hexadecimal values when the CID
	type is hexadecimal.
	Default Value: ""

Example • This setvar example shows the value set to "printer".

! U1 setvar "wlan.ip.dhcp.cid_suffix" "printer"

What the setvar value is set to is the getvar result. In this example, the getvar result is "printer".

12/16/13 EPL Programming Guide 14245L-003 Rev. A