Zebra Technologies 14245L-003 manual Bar Code, = yes = no

52

EPL Commands

B

B

Bar Code

Description Use this command to print standard bar codes.

Syntax Bp1,p2,p3,p4,p5,p6,p7,p8,”DATA”

Parameters This table identifies the parameters for this format:

Parameters		Details
p1 =	Horizontal start	Horizontal start position (X) in dots.
	position
p2 =	Vertical start position	Vertical start position (Y) in dots.
p3 = Rotation		Accepted Values:
			0 = normal (no rotation)
			1 = 90 degrees
			2 = 180 degrees
			3 = 270 degrees
p4 = Bar Code selection.		See Table 1, Bar Codes on page 53 for more information.
p5 = Narrow bar width		Narrow bar width in dots.
		See Table 1, Bar Codes on page 53 for more information.
p6 = Wide bar width		Wide bar width in dots.
		Accepted Values: 2-30
		See Table 1, Bar Codes on page 53 for more information.
p7 = Bar code height		Bar code height in dots.
p8 = Print human readable		Accepted Values:
	code		B = yes
			N = no
DATA = Fixed data field		The data in this field must comply with the selected bar code’s
		specified format. The backslash (\) character designates the
		following character is a literal and will encode into the data
		field. Refer to the following examples:
			To Print	Enter into data field
		"		\"
			"Company"	\"Company\"
		\		\\
			\code\	\\code\\

14245L-003 Rev. A EPL Programming Guide 12/16/13