Zebra Technologies 14245L-003 manual B20,400,M,m2001,840,93065,1692,RS

EPL Commands

b

Example •

b20,400,M,m2”001,840,93065,1692,[)>RS

01GS98XXXZZFDAAFGSSHIPGS309GSGS1/1GS10GS NGSGSCAMARILLOGSCAGSRSEOT!!!!!!!!!!!!!!!!!!!!!!!”↵

Note •

1.This programming example represents actual data used to format a single AIM- compliant MaxiCode symbol as programmed by a major international and domestic shipping company.

2.The shipper has explicitly set the MaxiCode symbol for Mode 2. This can be omitted by the programmer and the printer will auto-select the mode per the rules on page 72.

3.The shipper has used the “!” character to pad the symbol’s data. A scanner reads back all the “Data” within the quotation marks, including the “!” characters following the End of Message Marker (EOT).

4.All of the data fields in the Low Priority Message are not used in the example. Some are left empty with the field delimiting GS character used as a format field holder.

75

12/16/13 EPL Programming Guide 14245L-003 Rev. A