Zebra Technologies 14245L-003 manual Line Mode Font Substitution, 125

EPL Commands

oE

125

oE

Line Mode Font Substitution

Description This command is a Page Mode (EPL2) command that allows the printer to set alternate Line Mode font character sets. The fonts are activated by the oE command and are intended for EPL1 emulation.

Mobile printers, such as the TR 220, ignore this command.

Syntax oEp1,p2,p3,p4,p5

Parameters This table identifies the parameters for this format:

Parameters		Details
p1 = 5 x 7 bitmap font		5 x 7 bitmap font - Normal (CCSET4)
		Line Mode EPL1 Compatibility Font A0
		Total character area is 8 x 11 dots
p2	= 5 x 7 bitmap font	5 x 7 bitmap font - Bold (CCSET4)
		Line Mode EPL1 Compatibility Font A0
		Total character area is 8 x 11 dots
p3	= 5 x 7 bitmap font	5 x 7 bitmap font - Doubled (CCSET4)
		Line Mode EPL1 Compatibility Font A0
		Total character size is 8 x 11 dots
p4	= 14 x 22 bitmap font	14 x 22 bitmap font - (CCSET1)
		Line Mode EPL1 Compatibility Font A
		Total character area is 16 x 26 dots
p5	= 10 x 18 bitmap font	10 x 18 bitmap font - (CCSET3)
		Line Mode EPL1 Compatibility Font A
		Total character area is 12 x 22 dots

•Parameters p1-p5 are preloaded soft fonts.

•Parameters p1-p5 must be all be lower case alpha soft fonts. See the ES command on page 93 for more details on soft fonts.

•The EPL2 font sets 2 & 4 can be restored as the default Line Mode fonts by sending the o command without a parameter.

12/16/13 EPL Programming Guide 14245L-003 Rev. A