Zebra Technologies 14245L-003 manual Wlan.signalquality, 301, U1 getvar wlan.signalquality

SGD Wireless Commands

wlan.signal_quality

301

wlan.signal_quality

Description This command instructs the printer to return the current signal quality of the wireless network. Values below 40% represent a poor signal quality, and radio communication is not reliable. For printer support, see SGD Command Support on page 315.

Type getvar

Note • For details on SGD command structure, see Command Structure on page 250.

This table identifies the command for this format:

Commands	Details
getvar	This command instructs the printer to return the current signal quality of
	the wireless network.
	Format: ! U1 getvar "wlan.signal_quality"

Example • In this example, the getvar result is the current signal_quality value.

! U1 getvar "wlan.signal_quality"

12/16/13 EPL Programming Guide 14245L-003 Rev. A