Zebra Technologies 14245L-003 manual Ip.snmp.getcommunityname, 199

SGD Printer Settings

ip.snmp.get_community_name

199

ip.snmp.get_community_name

Description This printer setting is used when making SNMP queries. The SNMP client must supply the get community name that matches the printer’s get community name in order to query any SNMP data. For printer support, see SGD Command Support on page 315.

Type getvar; setvar

Note • For details on SGD command structure, see Command Structure on page 638.

This table identifies the commands for this format:

Commands	Details
getvar	This command instructs the printer to get the SNMP get community name
	string.
	Format: ! U1 getvar "ip.snmp.get_community_name"
	For protection a single "*" prints.
setvar	This command instructs the printer to set the SNMP get community name
	string.
	Format:
	! U1 setvar "ip.snmp.get_community_name" "value"
	Values: A maximum of 19 alphanumeric characters.
	Default: "public"

Example • This setvar example shows the value set to "public".

!U1 setvar "ip.snmp.get_community_name" "public"

When the setvar value is set to "public", the getvar result is "*".

12/16/13 EPL Programming Guide 14245L-003 Rev. A