Briggs & Stratton Pressure Washer manual Troubleshooting, Problem Cause Correction

Models: Pressure Washer

1 56
Download 56 pages 12.13 Kb
Page 23
Image 23

Troubleshooting

Problem

Cause

Correction

 

1.

Low pressure nozzle installed.

1.

Replace with high pressure nozzle.

 

2.

Water inlet is blocked.

2.

Clear inlet.

 

3.

Inadequate water supply.

3.

Provide adequate water flow.

Pump has following problems: failure

4.

Inlet hose is kinked or leaking.

4.

Straighten inlet hose, patch leak.

5.

Clogged inlet hose screen.

5.

Check and clean inlet hose screen.

to produce pressure, erratic pressure,

6.

Water supply is over 100°F (38°C).

6.

Provide cooler water supply.

chattering, loss of pressure, low water

7.

High pressure hose is blocked or

7.

Clear blocks in outlet hose.

volume.

 

 

leaks.

 

 

 

8.

Spray gun leaks.

8.

Replace spray gun.

 

9.

Nozzle is obstructed.

9.

Clean nozzle.

 

10.

Pump is faulty.

10.

Contact local service facility.

 

 

 

 

 

 

1.

Detergent siphoning tube is not

1.

Insert detergent siphoning tube into

 

 

submerged.

 

detergent.

Detergent fails to mix with spray.

2.

Detergent siphoning tube/filter is

2.

Clean or replace filter/detergent

 

 

clogged or cracked.

 

siphoning tube.

 

3.

High pressure nozzle installed.

3.

Replace with low pressure nozzle.

 

 

 

Engine runs good at no-load but "bogs"

Engine speed is too slow.

Move throttle control to FAST position. If

when load is added.

 

 

engine still "bogs down", contact local

 

 

service facility.

 

 

 

 

 

 

 

 

 

1.

Low oil level.

1.

Fill crankcase to proper level.

 

2.

Dirty air cleaner.

2.

Clean or replace air cleaner.

 

3.

Out of fuel.

3.

Fill fuel tank.

Engine will not start; or starts and runs

4.

Stale fuel.

4.

Drain fuel tank; fill with fresh fuel.

5.

Spark plug wire not connected to

5.

Connect wire to spark plug.

rough.

 

spark plug.

 

 

 

 

 

 

 

6.

Bad spark plug.

6.

Replace spark plug.

 

7.

Water in fuel.

7.

Drain fuel tank; fill with fresh fuel.

 

8.

Excessively rich fuel mixture.

8.

Contact local service facility.

 

 

 

Engine shuts down during operation.

Out of fuel.

Fill fuel tank.

 

 

 

 

 

 

 

Engine lacks power.

Dirty air filter.

Replace air filter.

 

 

 

 

 

23

Page 23
Image 23
Briggs & Stratton Pressure Washer manual Troubleshooting, Problem Cause Correction

Pressure Washer specifications

Briggs & Stratton pressure washers are renowned for their reliability, performance, and user-friendly design, making them a popular choice for homeowners and professionals alike. These powerful cleaning machines employ advanced technologies that facilitate efficient and thorough cleaning of various surfaces, including driveways, patios, vehicles, and outdoor furniture.

At the heart of every Briggs & Stratton pressure washer is a robust engine designed to deliver high performance. Most models are equipped with OHV (Overhead Valve) engines that provide better fuel efficiency, lower emissions, and quieter operation, ensuring you get the job done without disturbing the neighborhood. The engines deliver impressive pressure ratings, usually ranging from 1,500 to 3,300 PSI, allowing users to tackle even the toughest cleaning tasks with ease.

One of the standout features of Briggs & Stratton pressure washers is their ergonomic design. Many models feature an adjustable spray nozzle, enabling users to customize the water pressure according to the task at hand. Whether you're dealing with delicate surfaces or stubborn grime, the ability to switch from high-pressure jets to gentler sprays enhances versatility and reduces the risk of damage.

In addition to adjustability, Briggs & Stratton pressure washers often incorporate the brand's own exclusive technology called "PowerFlow+." This innovative feature enables users to draw water from a nearby source (like a pond or rain barrel) while simultaneously applying detergent through a dedicated soap nozzle. This dual capability makes cleaning faster and more effective, particularly for large areas.

Durability is another notable characteristic of Briggs & Stratton pressure washers. Many models are built with high-quality components, such as reinforced frames and heavy-duty wheels, allowing for easy maneuverability across various terrains. The inclusion of large, pneumatic tires enhances stability and provides added traction during use, ensuring the washer can withstand the rigors of different cleaning environments.

Moreover, Briggs & Stratton emphasizes user convenience with features like onboard storage for nozzles, hoses, and accessories. This thoughtful design minimizes the likelihood of misplacing essential tools and ensures everything needed for cleaning is within reach.

In summary, Briggs & Stratton pressure washers stand out for their powerful engines, ergonomic design, innovative technologies, and durability. These features combine to create a user-friendly experience that caters to both novice operators and experienced users, making these pressure washers a reliable choice for various cleaning tasks. Whether you're maintaining your home or tackling a professional project, Briggs & Stratton pressure washers are equipped to deliver exceptional performance and lasting results.