2.Length of Coverage

B&S warrants to the initial owner and each subsequent purchaser that the Warranted Parts shall be free from defects in materials and workmanship which caused the failure of the Warranted Parts for a period of two years from the date the engine is delivered to a retail purchaser.

3.No Charge

Repair or replacement of any Warranted Part will be performed at no charge to the owner, including diagnostic labor which leads to the determination that a Warranted Part is defective, if the diagnostic work is performed at an Authorized B&S Service Dealer. For emissions warranty service contact your nearest Authorized B&S Service Dealer as listed in the “Yellow Pages” under “Engines, Gasoline,” “Gasoline Engines,” “Lawn Mowers,” or similar category.

4.Claims and Coverage Exclusions

Warranty claims shall be filed in accordance with the provisions of the B&S Engine Warranty Policy. Warranty coverage shall be excluded for failures of Warranted Parts which are not original B&S parts or because of abuse, neglect or improper maintenance as set forth in the B&S Engine Warranty Policy. B&S is not liable to cover failures of Warranted Parts caused by the use of add-on, non-original, or modified parts.

5.Maintenance

Any Warranted Part which is not scheduled for replacement as required maintenance or which is scheduled only for regular inspection to the effect of “repair or replace as necessary” shall be warranted as to defects for the warranty period. Any Warranted Part which is scheduled for replacement as required maintenance shall be warranted as to defects only for the period of time up to the first scheduled replacement for that part. Any replacement part that is equivalent in performance and durability may be used in the performance of any maintenance or repairs. The owner is responsible for the performance of all required maintenance, as defined in the B&S Operator’s Manual.

6.Consequential Coverage

Coverage hereunder shall extend to the failure of any engine components caused by the failure of any Warranted Part still under warranty.

Emission Information

Engines that are certified to meet the California Air Resources Board (CARB) Emission Standards must display information regarding the Emissions Durability Period and Air Index. The engine manufacturer makes this information available to the consumer on emission labels. The engine emission label will indicate certification information.

The Emissions Durability Period describes the number of hours of actual running time for which the engine is certified to be emissions compliant, assuming proper maintenance in accordance with the Operating & Maintenance Instructions. The following categories are used:

Moderate: Engine is certified to be emission compliant for 125 hours of actual engine running time.

Intermediate: Engine is certified to be emission compliant for 250 hours of actual engine running time.

Extended: Engine is certified to be emission compliant for 500 hours of actual engine running time.

For example, a typical walk-behind lawn mower is used 20 to 25 hours per year. Therefore, the Emissions Durability Period of an engine with an intermediate rating would equate to 10 to 12 years.

Certain engines will be certified to meet the United States Environmental Protection Agency (USEPA) Phase 2 emission standards. For phase 2 certified engines, the Emissions Compliance Period referred to on the Emissions Compliance label indicates the number of operating hours for which the engine has been shown to meet Federal emission requirements.

For engines less than 225 cc displacement: Category C = 125 hours

Category B = 250 hours Category A = 500 hours.

For engines of 225 cc or more displacement: Category C = 250 hours

Category B = 500 hours Category A = 1000 hours.

25

Page 24 Page 26
Page 25
Image 25
Briggs & Stratton Pressure Washer manual Emission Information, Claims and Coverage Exclusions, Maintenance
Page 24 Page 26

Pressure Washer specifications

Briggs & Stratton pressure washers are renowned for their reliability, performance, and user-friendly design, making them a popular choice for homeowners and professionals alike. These powerful cleaning machines employ advanced technologies that facilitate efficient and thorough cleaning of various surfaces, including driveways, patios, vehicles, and outdoor furniture.

At the heart of every Briggs & Stratton pressure washer is a robust engine designed to deliver high performance. Most models are equipped with OHV (Overhead Valve) engines that provide better fuel efficiency, lower emissions, and quieter operation, ensuring you get the job done without disturbing the neighborhood. The engines deliver impressive pressure ratings, usually ranging from 1,500 to 3,300 PSI, allowing users to tackle even the toughest cleaning tasks with ease.

One of the standout features of Briggs & Stratton pressure washers is their ergonomic design. Many models feature an adjustable spray nozzle, enabling users to customize the water pressure according to the task at hand. Whether you're dealing with delicate surfaces or stubborn grime, the ability to switch from high-pressure jets to gentler sprays enhances versatility and reduces the risk of damage.

In addition to adjustability, Briggs & Stratton pressure washers often incorporate the brand's own exclusive technology called "PowerFlow+." This innovative feature enables users to draw water from a nearby source (like a pond or rain barrel) while simultaneously applying detergent through a dedicated soap nozzle. This dual capability makes cleaning faster and more effective, particularly for large areas.

Durability is another notable characteristic of Briggs & Stratton pressure washers. Many models are built with high-quality components, such as reinforced frames and heavy-duty wheels, allowing for easy maneuverability across various terrains. The inclusion of large, pneumatic tires enhances stability and provides added traction during use, ensuring the washer can withstand the rigors of different cleaning environments.

Moreover, Briggs & Stratton emphasizes user convenience with features like onboard storage for nozzles, hoses, and accessories. This thoughtful design minimizes the likelihood of misplacing essential tools and ensures everything needed for cleaning is within reach.

In summary, Briggs & Stratton pressure washers stand out for their powerful engines, ergonomic design, innovative technologies, and durability. These features combine to create a user-friendly experience that caters to both novice operators and experienced users, making these pressure washers a reliable choice for various cleaning tasks. Whether you're maintaining your home or tackling a professional project, Briggs & Stratton pressure washers are equipped to deliver exceptional performance and lasting results.
Top Page Image Contents