Zebra Technologies 14245L-003 manual Wlan.txrate, 305, U1 setvar wlan.txrate all

SGD Wireless Commands

wlan.tx_rate

305

wlan.tx_rate

Description This printer setting refers to specifying the wireless transmit rate. For printer support, see SGD Command Support on page 315.

Type getvar; setvar

Note • For details on SGD command structure, see Command Structure on page 250.

This table identifies the commands for this format:

Commands	Details
getvar	This command instructs the printer to respond with the wireless transmit
	rate.
	Format: ! U1 getvar "wlan.tx_rate"
setvar	This command instructs the printer to set the wireless transmit rate.
	Format: ! U1 setvar "wlan.tx_rate" "value"
	Values: 1, 2, 5.5, 11, all
	Default: "all"

Example • This setvar example shows the value set to "all".

! U1 setvar "wlan.tx_rate" "all"

When the setvar value is set to "all", the getvar result is "all".

12/16/13 EPL Programming Guide 14245L-003 Rev. A