SGD Wireless Commands
ip.dhcp.cid_all
256
14245L-003 Rev. A EPL Programming Guide 12/16/13
ip.dhcp.cid_all
Description This printer setting defines the entire client identifier (DHCP option 61) if the
DHCP is enabled and "ip.dhcp.cid_type" is set to "0", or "2". The MAC address is
used if the type is set to "1". For printer support, see SGD Command Support on page 315.
Type getvar; setvar
This table identifies the commands for this format:
Note • For details on SGD command structure, see Command Structure onpage 250.
Commands Details
getvar This command instructs the printer to respond with the client identifier
prefix and suffix.
Format: ! U1 getvar "ip.dhcp.cid_all"
setvar This command instructs the printer to change the CID prefix and suffix.
Format: ! U1 setvar "ip.dhcp.cid_all" "value"
Valu e s : A maximum length of 60 characters if the CID type is ASCII, or
120 characters if the CID type is hexadecimal.
Default Value: ""
Example • This setvar example shows the value set to "printer".

! U1 setvar "ip.dhcp.cid_all" "printer"

What the setvar value is set to is the getvar result. In this example, the getvar result is
"printer".