SGD Printer Settings
odometer.total_print_length
212
14245L-003 Rev. A EPL Programming Guide 12/16/13
odometer.total_print_length
Description This command tracks the total length of media that printed over the life of the
printer. For printer support, see SGD Command Support on page 315.
Type getvar
This table identifies the command for this format:
Note • For details on SGD command structure, see Command Structure onpage 638.
Commands Details
getvar This command returns the value of the total length of media that printed
over the life of the printer.
Format: ! U1 getvar "odometer.total_print_length"
Example • This example shows how to get the total length of media that printed over the life
of the printer.
1. To get the total length of media that has printed to date, type:
! U1 getvar "odometer.total_print_length"
Something similar to this is shown:
"8560 INCHES, 21744 CENTIMETERS"