Zebra Technologies 14245L-003 manual 316, SGD Command Syntax

316

SGD Command Support

Printer and Firmware Compatibility

Printer and Firmware Compatibility

Table 7 identifies the supported printer model and minumum firmware version for all SGD commands. In order to set and get configurations, the SGD commands can be used through the Ethernet, serial, parallel, and USB interfaces.

Note • The printer responds with the printer setting of "?" if the printer setting:

• does not exist

• has not been configured yet

Important • All the firmware versions noted in Table 7, refer to minimum firmware version required.

Table 7 • SGD Command Syntax

SGD Commands	ZM400, ZM600	G-Series
appl.bootblock	E53.15.x	V61.15.xZ
		V56.15.xZ
appl.name	E53.15.x	V61.15.xZ
		V56.15.xZ
card.inserted	E53.15.x	V61.15.xZ
		V56.15.xZ
card.mac_addr	E53.15.x	V61.15.xZ
		V56.15.xZ
cutter.clean_cutter		V61.15.xZ
		V56.15.xZ
device.languages	E53.15.x	V61.15.xZ
		V56.15.xZ
device.pnp_option		V61.15.xZ
		V56.15.xZ
external_wired.ip.addr	** E53.15.x	—
external_wired.ip.arp_interval	E53.15.x	—
external_wired.ip.default_addr.enable	E53.15.x	—
external_wired.ip.dhcp.cid_all	** E53.15.x	—
external_wired.ip.dhcp.cid_enable	** E53.15.x	—
external_wired.ip.dhcp.cid_prefix	** E53.15.x	—
external_wired.ip.dhcp.cid_suffix	** E53.15.x	—
external_wired.ip.dhcp.cid_type	** E53.15.x	—
external_wired.ip.gateway	E53.15.x	—
external_wired.ip.netmask	E53.15.x	—

* On these printers with ZebraNet™ 10/100 Internal Print Server.

** On these printers with ZebraNet™ 10/100 External Print Server, firmware version 1.1.5

14245L-003 EPL Programming Guide 12/16/13