3Com 4500 PWR 50-PORT manual Commands available on your Switch, Clock datetime Syntax, Length

346CHAPTER 12: USING SYSTEM MANAGEMENT COMMANDS

Basic System	This section describes the basic system configuration and system management
Configuration and	commands available on your Switch 4500.
Management
Commands
clock datetime	Syntax
	clock datetime time date
	View
	User view
	Parameters
	time : Enter the current time in HH:MM:SS format . HH can be in the range 0 to
	23. MM and SS can be in the range 0 to 59.
	date : Enter the current year in MM/DD/YYYY or YYYY/MM/DD format . YYYY can be
	in the range 2000 to 2099. MM can be in the range 1 to 12. DD can be in the range
	1 to 31.
	Description
	Use the clock datetime command to set the current system time and date. The
	default is 23:55:52, 2000/4/1.
	Related command: display clock
	Example
	To set the system time and date to 09:30:00, 2004/1/1, enter the following:
	<SW4500>clock datetime 09:30:00 2004/01/01
clock summer-time	Syntax
	clock summer-time zone_name { one-off repeating } start_time
	start_date end_time end_date offset_time
	undo clock summer-time
	View
	User view
	Parameters
	zone_name: Enter the name of the summer time zone, up to 32 characters in
	length.
	one-off: Specifies that the summer time is set for the selected year.
	repeating: Specifies that the summer time is set for every year, starting from the
	selected year.
	start_time: Enter the start time of summer time, in the format HH:MM:SS.
	start_date: Enter the start date of summer time, in the format YYYY/MM/DD.