3Com 4500 50-PORT manual Delete the community name comaccess, SW4500snmp-agent community write mgr

384CHAPTER 12: USING SYSTEM MANAGEMENT COMMANDS

Configure community name as mgr and read-write access permission.

<SW4500>system-view

System View: return to User View with Ctrl+Z.

[SW4500]snmp-agent community write mgr

[SW4500]

Delete the community name comaccess.

[SW4500]undo snmp-agent community comaccess

snmp-agent group Syntax

snmp-agent group { v1 v2c } group_name [ read-view read-view] [ write-view write-view] [ notify-view notify-view] [ acl acl-list]

undo snmp-agent group { v1 v2c } group-name

snmp-agent group v3 group-name[ authentication privacy ] [ read-view read-view] [ write-view write-view] [ notify-view notify-view] [ acl acl-list]

undo snmp-agent group v3 group-name[ authentication privacy ]

View

System view

Parameter

group-name:Enter a group name, up to 32 characters in length.

authentication: Specifies that the packet is authenticated without encryption.

privacy: Specifies that the packet is authenticated and encrypted.

read-view:Configures read-only view settings.

read-view:Enter a read-only view name, up to 32 characters in length.

write-view:Configures read and write view settings.

write-view:Enter a read and write view name, up to 32 characters in length.

notify-view:Configures notify view settings.

notify-view:Enter a notify view name, up to 32 characters in length.

acl acl-list:Enter the access control list for this group name.

v3: Configures SNMP version 3.

Description

Use the snmp-agent group command to configure a new SNMP group, that is, map an SNMP user to SNMP view.

Use the undo snmp-agent group command to delete a specified SNMP group.