3Com 4500 50-PORT manual Debugging lacp packet Syntax, 4500debugging link-aggregation error

64CHAPTER 2: USING PORT COMMANDS

Ethernet Port Link

Aggregation

Commands

debugging link-aggregation error

debugging link-aggregation event

This section describes the commands you can use to configure Ethernet Port LInk Aggregation on the Switch.

Syntax

debugging link-aggregation error

undo debugging link-aggregation error

View

User View

Parameter

None

Description

Use the debugging link-aggregation error command to enable link aggregation error debugging. Use the undo debugging link-aggregation error command to disable link aggregation error debugging.

Example

To enable link aggregation error debugging, enter the following:

<4500>debugging link-aggregation error

Syntax

debugging link-aggregation event

undo debugging link-aggregation event

View

User View

Parameter

None

Description

Use the debugging link-aggregationevent command to enable link aggregation events debugging. Use the undo debugging link-aggregation event command to disable link aggregation events debugging.

Example

To enable link aggregation events debugging, enter the following:

<4500>debugging link-aggregation event

debugging lacp packet Syntax

debugging lacp packet [ interface { interface_type interface_number interface_name } [ to { interface_type interface_num interface_name } ] ]