192 CHAPTER 8: USING QOS/ACL COMMANDS
QoS setting information of the specified interfaces, including traffic policing, rate
limit at interfaces, and so on.
Example
Display all the configurations of QoS parameters for unit 1.
<4500> display qos-interface 1 all
display qos-interface
line-rate
Syntax
display qos-interface { interface-name | interface-type
interface-num | unit-id } line-rate
View
Any view
Parameter
interface-name | interface-type interface-num: Interface of the Switch, for
detailed a description, refer to the port command in this guide.
unit-id: Unit ID of the Switch.
Description
Use the display qos-interface line-rate command to view the traffic rate
limitations of the interface output. If you do not specify interface parameters, you
will view the traffic rate limitations of all interfaces’ output. If you enter interface
parameters, you will view the parameter settings of traffic rate limitations of the
specified interfaces’ output.
Example
Display the parameter configuration of interface traffic rate limitation.
<4500>system-view
System View: return to User View with Ctrl+Z
[4500] display qos-interface line-rate
Ethernet1/0/1: line-rate
Outbound: 128 kbps
display qos-interface
mirrored-to
Syntax
display qos-interface { interface-name | interface-type
interface-num | unit-id } mirrored-to
View
Any view
Parameter
interface-name | interface-type interface-num: Interface of the Switch,
for detailed description, refer to the port command in this guide.
unit-id: Unit ID of the Switch.