VLAN Configuration Commands 79
View
System View
Parameter
vlan_id: Enter the ID of the VLAN interface you want to configure, in the range
1 to 4094. Note that VLAN1 is the default VLAN and cannot be deleted.
Description
Use the interface vlan-interface command to enter a VLAN interface view
and use the related configuration commands. Use the undo interface
vlan-interface command to exit the current VLAN interface.
Related command: display interface vlan-interface.
Example
To enter the interface view of VLAN1, enter the following:
<4500>system-view
System View: return to User View with Ctrl+Z.
[4500] interface vlan-interface 1
[4500-Vlan-interface1]
port Syntax
port interface_list
undo port interface_list
View
VLAN view
Parameter
interface_list: list of Ethernet ports to be added to or deleted from a certain
VLAN, expressed as interface_list= {{ interface_type interface_num |
interface_name } [ to { interface_type interface_num | interface_name } ]
}&<1-10>.
interface_type is the interface type, interface_num is the interface number
and interface_name is the interface name. For their meanings and value range, see
the parameter of Port in this document. The interface number after keyword to
must be larger than or equal to the port number before to.
&<1-10>: Represents the repeatable times of parameters, 1 is the minimal and 10
is the maximal.
Description
Using the port command, you can add one port or one group of ports to a VLAN.
Using the undo port command, you can cancel one port or one group of ports
from a VLAN.
You can add/delete trunk port and hybrid ports to/from a VLAN by port and undo
port commands in Ethernet Port View, but not in VLAN View.
For the related command, see display vlan.