22 CHAPTER 1: USING SYSTEM ACCESS COMMANDS
summary: Display the summary of a user interface.
Description
Use the display user-interface command to view information on a user
interface. You can choose to access this information by user interface type and
type number, or by user interface index number. The information displayed is the
same whichever access method you use.
This command without the summary parameter displays user interface type,
absolute/relative index, transmission speed, priority, authentication methods, and
physical location. This command with the summary parameter displays one user
interface in use with user interface name and other user interface information.
Example
To display information on a user interface with an index number of 0, enter the
following.
<4500>display user-interface aux 0
The information is displayed in the following format:
Idx Type Tx/Rx Modem Privi Auth Int
0 AUX 0 19200 - 3 P -
+ : Current user-interface is active.
F : Current user-interface is active and work in async mode.
Idx : Absolute index of user-interface.
Type : Type and relative index of user-interface.
Privi: The privilege of user-interface.
Auth : The authentication mode of user-interface.
Int : The physical location of UIs.
A : Authentication use AAA.
N : Current UI need not authentication.
P : Authentication use current UI's password.
Display the summary information of user interface 0.
<4500>display user-interface 0 summary
0: U
Tabl e 3 Output description of the display user-interface command
Field Description
+Indicates that the user interface is in use
FCurrent user interface is in use and working in asynchronous
mode
Idx Displays the index number of the user interface
Type Displays the type and type number of the user interface
Tx/Rx Displays the user interface speed
Modem Displays the modem operation mode
Privi Indicates the command level that can be accessed from this
user interface
Auth Indicates the user interface authentication method
Int Indicates the physical location of the user interface