3Com 4500 PWR 26-PORT manual Clear the 802.1x statistics on Ethernet 1/0/2, Debugging Syntax

Centralized MAC Address Authentication Configuration Commands 247

interface-type interface-num interface-name }, where interface-type specifies the port type, interface-num specifies the port number and interface-name specifies the port name. For the respective meanings and value ranges, read the Parameter of the Port Configuration section.

Description

Use the reset dot1x statistics command to reset the statistics of 802.1x.

This command can be used to re-perform statistics if the user wants to delete the former statistics of 802.1x.

When the original statistics are cleared, if no port type or port number is specified, the global 802.1x statistics of the Switch and 802.1x statistics on all the ports will be cleared. If the port type and port number are specified, the 802.1x statistics on the specified port will be cleared.

Related commands: display dot1x.

Example

Clear the 802.1x statistics on Ethernet 1/0/2.

<4500>reset dot1x statistics interface ethernet 1/0/2

Centralized MAC

Address

Authentication

Configuration

Commands

debugging Syntax

mac-authenticationdebugging mac-authentication event event

undo debugging mac-authentication event

View

User View

Parameter

None