3Com 4500 26-PORT Debugging lacp state Syntax, 4500debugging lacp packet interface ethernet1/0/1

Ethernet Port Link Aggregation Commands 65

undo debugging lacp packet [ interface { interface_type interface_number interface_name } [ to { interface_type interface_num interface_name } ] ]

View

User View

Parameter

interface { interface_type interface_ num interface_name } [ to { interface_type interface_ num interface_name } ]: Specifies ports. You can specify multiple sequential ports with the to parameter, instead of specifying only one port.

interface_name: Specifies port name, in the format of interface_name =

interface_type interface_num.

interface_type: Specifies port type and interface_num port number.

For more information, see the parameter item for the interface command.

Description

Use the debugging lacp packet command to enable LACP packets debugging at a designated port or ports. Use the undo debugging lacp packet command to disable LACP packets debugging at a designated port or ports.

Example

To enable LACP packets debugging at Ethernet1/0/1, enter the following:

<4500>debugging lacp packet interface ethernet1/0/1

debugging lacp state Syntax

debugging lacp state [ interface { interface_type interface_number interface_name } [ to { interface_type interface_num interface_name } ] ] { { actor-churn mux partner-churn ptx rx }* all }

undo debugging lacp state [ interface { interface_type interface_number interface_name } [ to { interface_type interface_num interface_name } ] ] { { actor-churn mux partner-churn ptx rx }* all }

View

User View

Parameter

interface { interface_type interface_num interface_name } [ to { interface_type interface_num interface_name } ]: Specifies ports. You can specify multiple sequential ports with the to parameter, instead of specifying only one port.