3Com 4500 26-PORT, 4500 PWR 50-PORT, 4500 PWR 26-PORT Header Syntax, 4500free user-interface aux

Logging in Commands 25

Example

To reset user interface AUX 1 from another user interface on the Switch, enter the following:

<4500>free user-interface aux 1

After the command is executed, user interface AUX 1 is disconnected. When you next log in using user interface AUX 1, it opens using the default settings.

header Syntax

header { shell incoming login } text

undo header { shell incoming login }

View

System view

Parameter

login: Login information in case of authentication. It is displayed before the user is prompted to enter user name and password.

shell: User conversation established header, the information output after user conversation has been established. If authentication is required, it is prompted after the user passes authentication.

incoming: Login header, the information output after a Modem user logs in. If authentication is required, it is prompted after the user passes authentication. In this case, no shell information is output.

text: Specifies the title text. If you do not choose any keyword in the command, the system displays the login information by default. The system supports two types of input mode: you can input all the text in one line (a maximum of 256 characters, including command key word, can be entered); or you can input all the text in several lines using the <Enter> key, and more than 256 characters can be entered. The text starts and ends with the first character. After entering the last character, press the <Enter> key to exit the interactive process.

Description

Use the header command to configure the system to display a header during user log in. Use the undo header { shell incoming login } command to delete the specified header.

When the user logs in, and a connection is activated, the login header displays. After the user successfully logs in, the shell header displays.

The first characters in the text are regarded as the start and stop characters. After you type in the stop character, the system will exit the header command automatically.

If you do not want to use the control characters, you can type in text with the same characters at the beginning and end, and press Enter.